CHAMPAGNE WHITE GOLD - METALLIC LOW CURE STRETCH PLASTISOL INK

LIGHT COPPER - METALLIC LOW CURE STRETCH PLASTISOL INK

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Alert: Looking for a specific color? We can match PANTONES or competitor's colors. Click Here to Order. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

BRILLIANT PALE GOLD - METALLIC LOW CURE STRETCH PLASTISOL INK

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

ALL PURPOSE PLASTISOL INK - COLORS-PINT

All Purpose Plastisol Ink Series Total Ink Solutions® SPORT Series is a phthalate free plastisol ink that has a high opacity and EXTRA bleed resistant formulation to go along with our low cure creamy ink formulation to make this the ultimate choice when dealing with highly pigmented apparel that are prone to bleeding. This ink is our NEWEST formulation and we are excited for you to start using it in your shop! Alert: Looking for a specific color? We can match PANTONES or competitor's colors. Click Here to Order. Features: Vibrant colors. Creamy Inks. High Opacity EXTRA Bleed Resistant. Soft hand prints. LOWER Cure. Short flash times. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 40% Cotton / 60% Polyester 100% Cotton / 90% Polyester TRI BLENDS 100% Polyester Details: Designed as a multipurpose ink on up to a 100% Polyester substrate. Highly bleed prone athletic apparel should still use dedicated ATHETIC series inks for best results. For most shops this ink will same time by no longer needing to swap out ink in the middle of a job when changing apparel types. For the best color output, it is suggested to use a white base on dark. For multiple colors and printing on dark garments, use an under base white such as our ALL PURPOSE White. Curing Instructions: Flash at 230°F (110°C) for 3 - 5 seconds and cure at 300°F (149°C) – 320°F (160°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

ROSE GOLD - METALLIC LOW CURE STRETCH PLASTISOL INK

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

SAATI PC BLUE TEXTILE EMULSION (BLUE COLOR)

Product Description GALLON - A durable and fast photopolymer pre-sensitized emulsion. Blue in color. Requires no mixing! Exposes approximately 8 times faster than standard diazo emulsions. Perfectly resistant to plastisol inks. Resistant to water based and discharge inks when post exposed. Very easy to reclaim. Available in gallon containers. Applications: Garment printing with plastisol ink. Characteristics:‹ Blue one part pure photopolymer emulsion resistant to plastisol ink, abrasion and humidity.‹ Exposes 8X faster than typical two part emulsions features/benefits.‹ 50% solids content and medium viscosity for fast build up and good bridging on wide range of mesh counts.‹ No mixing required and no diazo staining of mesh ‹ Water resistant when post exposed and can be used to print water based inks and adhesives. Directions for Use: Handle under yellow safe light or low wattage tungsten lights. Avoid exposure to daylight, quartz/halogen lamps, cool white fluorescent lamps or discharge lamps. sensitizing and mixing Emulsion is pre sensitized during production and does not require mixing. Coating: Using a high quality scoop coater or coating through, apply one or two coats to the substrate side of the screen, followed by one or two coats on the squeegee side. Drying & Storage: Thoroughly dry the coated screen at a maximum temperature of 104°F (40°C) in a dust free, dark or yellow light area, with the substrate side facing down to optimize stencil quality. Coated screens should be stored in a dust free, dry, safe light environment.

BLACK - METALLIC LOW CURE STRETCH PLASTISOL INK

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

METALLIC LOW CURE STRETCH PLASTISOL INK 24K GOLD

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Alert:Looking for a specific color? We can match PANTONES or competitor's colors.Click Here to Order. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

BRILLIANT BRIGHT GOLD - METALLIC LOW CURE STRETCH PLASTISOL INK

Low Cure Metallic Stretch Plastisol Ink Series Total Ink Solutions® Metallic Series is a phthalate free plastisol ink that creates an attractive and sparkling Metallic print effect on a wide variety of substrates. This ink truly looks like a melted metal in a can and prints easier than any other metallic in in the industry. Alert:Looking for a specific color? We can match PANTONES or competitor's colors. Click Here to Order. Features: Brilliant Metallic Double Hit NO UNDERBASE required. Opaque. Smooth Surface Stretch additive Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester 100% Polyester Details: Print metallic inks with ease by using the correct mesh screen. There is no need for any underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the metallic ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The metallics reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. Also, please note that while this is a low cure ink the metallic attribute needs to be taken into account when curing as metallic finishes can reflect heat, so make sure the ink is fully cured through testing prior to production. MESH: We suggest a 110 mesh screen for the Metallic Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 300°F (149°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>