Earn up to 11 Points.

Free Shipping on all plastisol ink’s orders over $250

  • Earn reward points and spend them on your next orders.
  • 24/7/365 customer support
Guaranteed Safe Checkout

DecAll the Variety Without the Extra Work!

Siser® EasyPatterns are the wow factor you’re looking for! Available in several colors and patterns for a variety of niches, there’s bound to be a pattern that’s perfect for that next project. If you like the trendy options of EasyPatterns then you’ll love the easy cutting, weeding, and application. The pressure sensitive carrier allows for quick and simple weeding and releases easily with a hot peel after application. With a semi gloss finish and soft hand, EasyPatterns are the star of the show even when applied with a home iron!

The new series of EasyPatterns are edge-to-edge designs pre-printed on ColorPrint Easy. Included are 10 revised favorites from Series 1, as well as 10 brand new patterns, in 12” widths.

These new EasyPatterns are not pre-masked, and TTD High Tack Mask must be purchased separately. The masking process will be identical to working with other ColorPrint products.

Application instructions have changed for Series 2. Because the new patterns are not pre-masked, images should be cut in the positive (not mirrored) and masked afterwards.

EasyPatterns are CPSIA Certified so you can decorate kid’s items with confidence.

Compatible Materials
  • 100% Cotton
  • 100% Polyester
  • Poly/Cotton Blends
  • Leather
Cutter Settings


  • Blade: Standard
  • Setting: Iron-on

Silhouette Cameo:

  • Blade: Standard, 3
  • Material: Heat Transfer, Smooth
  • Speed: 8
  • Force: 6

Brother Scan N Cut:

  • Blade: Standard, 2
  • Cut Speed: 1
  • Cut Pressure: 1
Other Cutter Settings

Roland GS/GX-24:

  • Blade: 45°
  • Gram-Force: 80-90
  • Offset: .250
  • Speed: 25-50 cm/s


  • Blade: 45°
  • Gram-Force: 9
  • Tool: CB09U 0
  • Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:

  • Blade: 45° / 60°
  • Gram-Force: 80-85
  • Speed: 300mm/s

Titan 2 & 3:

  • Blade: 45° / 60°
  • Gram-Force: 60-65
  • Speed: 300mm/s
  • Blade Advancing Varies

Mimaki CG-60SR III:

  • Blade: 45°
  • Gram-Force: 90
  • Offset: 30
  • Speed: 20-30mm/s
Application Settings

(Home Iron)

  • Set iron dial between Cotton and Linen
  • Cover design with Kraft Paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium/firm pressure for 10-15 seconds
  • If areas lift after application, cover and press for 5-10 seconds.
  • Peel carrier hot

(Heat Press)

  • Cut in reverse and weed excess material
  • Preheat garment for 2-3 seconds
  • Apply design at 275°F / 135°C
  • Use medium pressure for 5-10 seconds
  • Peel carrier hot then apply top layer
Accessories and Laundering


  • Wait 24 hours before first wash
  • Machine wash warm or cold with mild detergent
  • Do not bleach or dry clean
  • Dry on normal dryer setting

Recommended Accessories:

  • Siser Weeder
  • Multipurpose paper or Heat transfer cover sheet

Additional information

Dimensions1 × 1 × 1 in