EASYPSV™ REMOVABLE STICKER VINYL 12"

EASYPSV™ REMOVABLE STICKER VINYL 24"

Siser® EasyPSV™ Removable Stick it, Switch it, Smile! Create worry-free decor that can be changed repeatedly using EasyPSV™ Removable by Siser®. This temporary pressure sensitive vinyl takes the guesswork out of decorating. You don’t have to wonder if the adhesive vinyl will leave a gluey mess behind, or even worse, take some of the wall with it! EasyPSV Removable comes off cleanly and quickly without any special tools or solvents for care free customizing! While EasyPSV Removable lasts 2-3 years, you can choose to change it up at any time, and with a stylish matte finish who wouldn’t? Plus EasyPSVRemovable even includes Chalkboard! Use this black, textured vinyl to turn any hard surface into a writable chalkboard that’s compatible with soft chalk, standard chalk, and chalk ink markers. But the best part is, you can layer EasyPSV Permanent on top of EasyPSV Removable for temporary decals that have virtually endless color and finish combinations! Specifications: PVC composition 78# kraft liner Matte finish 76.2 Microns/3.0 Mils 45°/60° blade Can be layered Cutter Settings: Cricut: Blade: Standard Setting: Vinyl Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 8 Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 1 Roland GS/GX-24: Blade: 45°Gram Force: 80-110Offset: .250 Speed: 50 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0 Speed: 50 cm/s Titan Series: Blade: 45°/60° Gram Force: 55-60Speed: 180mm/s *Blade Advancing Varies Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the EasyPSV decoration. Gently peel away the application tape, leaving just your EasyPSV design on the object. Recommended Accessories & Care: EasyPSV™ Removable Applies to: painted drywallglass/mirrorswoodplasticmetalceramic Recommended Accessories: Siser WeederSiser Application TapeSiser Squeegee Care Instructions: Not recommended for use near flame/ heat source, with microwave, or dishwasher.

EASYPSV™ PERMANENT STICKER VINYL 24"

EasyPSV™ Permanent The stick that stays! Siser® EasyPSV™ Permanent by Siser® is your go-to decal vinyl for long-lasting projects. Durable enough to withstand outdoor elements such as sun exposure and rain, EasyPSV Permanent is ideal for car graphics, porch signs, and outdoor tools or equipment. Customize objects with your name or even your business’ name using EasyPSV for a decoration that lasts up to 3-5 years. The smooth, glossy finish and permanent adhesive will turn any hard surface into a work of art! The wide range of EasyPSV Permanent gloss colors even includes Glitter options that are sure to spark your creativity! Specifications: PVC composition 78# kraft liner Gloss finish 76.2 Microns/3 Mils 45°/60° blade Can be layered Cutter Settings: Cricut: Blade: Standard Setting: Vinyl Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 8 Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 2 Roland GS/GX-24: Blade: 45°Gram Force: 80-90Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0 Speed: 25 cm/s Titan Series: Blade:45°/60° Gram Force: 55-60Speed: 180mm/s *Blade Advancing Varies Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the design. Gently peel away the application tape, leaving just your EasyPSV design on the object. Recommended Accessories & Care Applies to: glass/mirrors wood plastic metal ceramic Recommended Accessories: Siser Weeder Siser Application Tape Siser Squeegee Care Instructions: Not recommended for use on drywall or other painted surfaces. Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® STARLING (PERMANENT VINYL) 12" MATTE

Siser® EasyPSV™ PermanentThe stick that stays!EasyPSV™ Permanent by Siser® is your go-to decal vinyl for long-lasting projects. Durable enough to withstand outdoor elements such as sun exposure and rain, EasyPSV Permanent is ideal for car graphics, porch signs, and outdoor tools or equipment. Customize objects with your name or even your business’ name using EasyPSV for a decoration that lasts up to 3-5 years. The smooth, glossy finish and permanent adhesive will turn any hard surface into a work of art! The wide range of EasyPSV Permanent gloss colors even includes Glitter options that are sure to spark your creativity! Specifications PVC composition78# kraft linerGloss finish76.2 Microns/3 Mils45°/60° bladeCan be layered Cutter Settings Cricut: Blade: StandardSetting: VinylSilhouette Cameo:Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 8Scan N Cut: Blade: Standard, 3Cut Speed: 1Cut Pressure: 2Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/sGraphtec: Blade: 45°Gram Force: 9Tool: CB09U+0Speed: 25 cm/sTitan Series:Blade:45°/60°Gram Force: 55-60Speed: 180mm/s*Blade Advancing Varies Application Instructions Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.)Weed excess vinyl.Remove the application tape’s paper liner and place tape on top of EasyPSV.Burnish with a squeegee.Lift the application tape and EasyPSV away from the paper liner.Place the application tape on your desired object.Burnish with a squeegee to fully adhere the design.Gently peel away the application tape, leaving just your EasyPSV design on the object. Recommended Accessories & Care Applies to:glass/mirrorswoodplasticmetalceramicRecommended Accessories:Siser WeederSiser Application TapeSiser SqueegeeCare Instructions:Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® STARLING (PERMANENT VINYL) 12" GLOSS

Siser® EasyPSV™ PermanentThe stick that stays!Siser® EasyPSV™ Permanent by Siser® is your go-to decal vinyl for long-lasting projects. Durable enough to withstand outdoor elements such as sun exposure and rain, EasyPSV Permanent is ideal for car graphics, porch signs, and outdoor tools or equipment. Customize objects with your name or even your business’ name using EasyPSV for a decoration that lasts up to 3-5 years. The smooth, glossy finish and permanent adhesive will turn any hard surface into a work of art! The wide range of EasyPSV Permanent gloss colors even includes Glitter options that are sure to spark your creativity! Specifications PVC composition78# kraft linerGloss finish76.2 Microns/3 Mils45°/60° bladeCan be layered Cutter Settings Cricut: Blade: StandardSetting: VinylSilhouette Cameo:Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 8Scan N Cut: Blade: Standard, 3Cut Speed: 1Cut Pressure: 2Roland GS/GX-24:Blade: 45°Gram Force: 80-90Offset: .250Speed: 25-50 cm/sGraphtec: Blade: 45°Gram Force: 9Tool: CB09U+0Speed: 25 cm/sTitan Series:Blade:45°/60°Gram Force: 55-60Speed: 180mm/s*Blade Advancing Varies Application Instructions Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.)Weed excess vinyl.Remove the application tape’s paper liner and place tape on top of EasyPSV.Burnish with a squeegee.Lift the application tape and EasyPSV away from the paper liner.Place the application tape on your desired object.Burnish with a squeegee to fully adhere the design.Gently peel away the application tape, leaving just your EasyPSV design on the object. Recommended Accessories & Care Applies to:glass/mirrorswoodplasticmetalceramicRecommended Accessories:Siser WeederSiser Application TapeSiser SqueegeeCare Instructions:Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® PERMANENT ETCH VINYL 12"

Siser® EasyPSV™ Permanent Etch The Hassle Free Etch Effect Siser® EasyPSV™ Etch promises a clean and classic look that resembles sandblasted or etched glass. Put down the heavy sandblaster and step away from the messy etching cream! EasyPSV Etch only needs your craft cutter and application tape to complete any and all of your glass or mirror projects. Etch’s smooth finish is complimented with a slight metallic dusting that allows the EasyPSV to be translucent enough to see the color of the decorated object, but also opaque enough to be distinctive. Place EasyPSV Etch on black surfaces for a wicked cool decal or watch as the sun illuminates it through your window. The permanent adhesive of EasyPSV Etch allows it to last for years and years. So when you use EasyPSV Etch you know you have a frosted look that won’t flake! Cutter Settings Cricut: Blade: Standard Setting: Light Cardstock Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 11 Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 2 Roland GS/GX-24: Blade: 45°Gram Force: 90-110Offset: .250 Speed: 35 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0 Speed: 35 cm/s Titan Series: Blade: 45°/60° Gram Force: 55-60Speed: 180mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. Application Instructions Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the design. Gently peel away the application tape, leaving just your EasyPSV design on the object. Click here for full EasyPSV™ Etch application instructions EasyPSV™ Etch Applies to: glass/mirrorswoodplasticmetalceramic Recommended Accessories & Care Recommended Accessories: Siser WeederSiser Squeegee Care Instructions: Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® PERMANENT ETCH VINYL 24"

Siser® EasyPSV™ Permanent Etch The Hassle Free Etch Effect Siser® EasyPSV™ Etch promises a clean and classic look that resembles sandblasted or etched glass. Put down the heavy sandblaster and step away from the messy etching cream! EasyPSV Etch only needs your craft cutter and application tape to complete any and all of your glass or mirror projects. Etch’s smooth finish is complimented with a slight metallic dusting that allows the EasyPSV to be translucent enough to see the color of the decorated object, but also opaque enough to be distinctive. Place EasyPSV Etch on black surfaces for a wicked cool decal or watch as the sun illuminates it through your window. The permanent adhesive of EasyPSV Etch allows it to last for years and years. So when you use EasyPSV Etch you know you have a frosted look that won’t flake! Cutter Settings Cricut: Blade: StandardSetting: Light Cardstock Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 11 Scan N Cut: Blade: Standard, 3Cut Speed: 1Cut Pressure: 2 Roland GS/GX-24: Blade: 45°Gram Force: 90-110Offset: .250Speed: 35 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0Speed: 35 cm/s Titan Series: Blade: 45°/60°Gram Force: 55-60Speed: 180mm/s*Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. Application Instructions Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the design. Gently peel away the application tape, leaving just your EasyPSV design on the object. Click here for full EasyPSV™ Etch application instructions EasyPSV™ Etch Applies to: glass/mirrorswoodplasticmetalceramic Recommended Accessories & Care Recommended Accessories: Siser WeederSiser Squeegee Care Instructions: Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® PERMANENT ETCH VINYL 48"

Siser® EasyPSV™ Permanent Etch The Hassle Free Etch Effect EasyPSV™ Etch promises a clean and classic look that resembles sandblasted or etched glass. Put down the heavy sandblaster and step away from the messy etching cream! EasyPSV Etch only needs your craft cutter and application tape to complete any and all of your glass or mirror projects. Etch’s smooth finish is complimented with a slight metallic dusting that allows the EasyPSV to be translucent enough to see the color of the decorated object, but also opaque enough to be distinctive. Place EasyPSV Etch on black surfaces for a wicked cool decal or watch as the sun illuminates it through your window. The permanent adhesive of EasyPSV Etch allows it to last for years and years. So when you use EasyPSV Etch you know you have a frosted look that won’t flake! Cutter Settings Cricut: Blade: StandardSetting: Light Cardstock Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 11 Scan N Cut: Blade: Standard, 3Cut Speed: 1Cut Pressure: 2 Roland GS/GX-24: Blade: 45°Gram Force: 90-110Offset: .250Speed: 35 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0Speed: 35 cm/s Titan Series: Blade: 45°/60°Gram Force: 55-60Speed: 180mm/s*Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. Application Instructions Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the design. Gently peel away the application tape, leaving just your EasyPSV design on the object. Click here for full EasyPSV™ Etch application instructions EasyPSV™ Etch Applies to: glass/mirrorswoodplasticmetalceramic Recommended Accessories & Care Recommended Accessories: Siser WeederSiser Squeegee Care Instructions: Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.

EASYPSV® GLITTER VINYL 12"

Siser® EasyPSV™ Permanent Glitter “There’s too much glitter!” -No Crafter Ever EasyPSV™ Glitter by Siser® is your everyday solution to blinging out everything in sight. This dazzling vinyl has a smooth but sparkly finish that can be applied to almost any hard surface – even curvy situations. Transform plain items into eye catching treasures with the gleaming glitz of EasyPSV Glitter! This cast vinyl is soft and pliable, so it’s ideal for tricky curved surfaces like wine glasses, ornaments, and buckets. The high-performance composition and permanent adhesive ensures a long-lasting durability, so you can bring EasyPSV Glitter wherever your creative imagination takes you! Specifications PVC Composition 78# kraft liner Gloss finish 75 Microns/3 Mils 45°/60° blade Can be layered Cutter Settings Cricut: Blade: StandardSetting: Vinyl Silhouette Cameo: Blade: Standard, 2Material: Vinyl, GlossySpeed: 7Force: 9 Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 1 Roland GS/GX-24: Blade: 45°Gram Force: 80-110Offset: .250 Speed: 50 cm/s Graphtec: Blade: 45°Gram Force: 9Tool: CB09U+0 Speed: 50 cm/s Titan Series: Blade: 45°/60° Gram Force: 55-60Speed: 180mm/s *Blade Advancing Varies Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs. Application Instructions Application Instructions: Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.) Weed excess vinyl. Remove the application tape’s paper liner and place tape on top of EasyPSV. Burnish with a squeegee. Lift the application tape and EasyPSV away from the paper liner. Place the application tape on your desired object. Burnish with a squeegee to fully adhere the design. Gently peel away the application tape, leaving just your EasyPSV design on the object. Click here for full EasyPSV™ Glitter application instructions. Recommended Accessories & Care EasyPSV™ Glitter Applies to: glass/mirrorswoodplasticmetalceramic Recommended Accessories: Siser WeederSiser Application TapeSiser Squeegee Care Instructions: Not recommended for use on drywall or other painted surfaces.Not recommended for use near flame/ heat source, or with microwave, and dishwasher.