GENERAL PURPOSE PLASTISOL INK - MIXING BASE

SHIPTECTION SHIPPING PROTECTION

Protect your shipment that are lost, broken, or stolen. ShipTection Shipping Insurance

GENERAL PURPOSE PLASTISOL INK - OVERPRINT GEL

General Purpose Plastisol Ink Phthalate Free, Ready to use Suitable for heat sensitive fabrics Superior adhesion to nylon fabrics Ideal for printing on bleed prone textile substrates Low bleed property resists dye migration Superb opacity for dark colored backgrounds In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp> STOCK, END-USE: Cotton, 50/50 cotton/polyester blends, and some synthetics. DESCRIPTION: General Purpose Plastisol Ink/PF-GP Series is formulated with a unique low viscosity and perfect consistency for printing straight from container. General Purpose Plastisol Ink/PF-GP Series may eliminate The need for modifiers and save production time in the process. It provides super soft-hand finish on most textile substrates, especially White and light-colored garments. Note: Pre-test on actual substrate before any full production run, for adhesion, wash fastness and other desired effects. FINISH: Durable, soft-hand finish. COLORS: Available low-bleed opaque colors; formulated using non-leaded pigments. SCREEN FABRIC: Mesh counts up to 355 mono-filament polyester (142T European Mesh). STENCIL: Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent CURE/DRYING: Heat-cure at approximately 320°F (160°C) for 1 to 3 minutes. Will not air-dry. MODIFICATIONS: To reduce ink viscosity with RE703 or RE704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when necessary. RE705 can be added up 10 to 20% (by weight of ink) if color shade is not crucial. SQUEEGEE: When printing textiles, use a medium/ hard (65-85 durometer) squeegee. STORAGE: Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings. PACKAGING: 1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters). SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information. WASH UP SOLVENT: T-125 Wash up or equivalent / SC-510 Biodegradable wash up. (Non-Petrochemical) MODIFIERS: PF-GP081 – Clear Extender Base / PF-GP084 – Soft Base / RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer COLOR RANGE: All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!

CLEAR TAPE - 2 MIL, 2" X 110' CLEAR

Clear Tape CHARACTERISTICS Aggressive hot melt adhesive for masking the edges of your screen after the emulsion or stencil has been applied. Clear Tape leaves no residue and is easy to remove. APPLICATIONS Temperature range: 45F – 120F PACKAGING Available in 2″ and 3″ Rolls.

HIGH OPAQUE PLASTISOL INK - BASE

High Opaque Plastisol Ink Phthalate Free, Ready to use For dark/light-colored fabrics Excellent High Opacity (Bleed Resistant Properties) In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) Section 108 Phthalates (<.1 dbp dehp> STOCK, END-USE: Cotton, 50/50 cotton/polyester blends, and some synthetics. DESCRIPTION: High Opaque Plastisol Ink/PF-HO Series is popularized with its consistent high-opaque print result on dark and light colored textiles. It is a formulation compatible to most plastisol additives For quick and easy modification in many textile applications. High Opaque Plastisol Ink/PF-HO Series is ready to use straight from the container or can be extended up to 50% for light color applications. Important Note: High Opaque Plastisol Ink/PF-HO Series colors do not contain bleed inhibitors. When Bleed Resistance is of the utmost concern, use PF-BR Series. Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects. FINISH: Durable, soft-hand finish. COLORS: Available low-bleed opaque colors; formulated using non-leaded pigments. SCREEN FABRIC: Mesh counts up to 355 mono filament polyester (142T European Mesh). STENCIL: Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent CURE/DRYING: Heat-cure at approximately 320°F (160°C) for 2 to 3 minutes. Will not air-dry. MODIFICATIONS: To reduce ink viscosity with RE-703 or RE-704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE-705 can be added up 10 to 20% (by weight of ink) if color shade or Opacity is not crucial. SQUEEGEE: When printing textiles, use a medium hard (65-75 durometer) squeegee. STORAGE: Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings. PACKAGING: 1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *30-gallon (113.4 Liters) and 55-gallon (207.9 Liters). SAFETY & HANDLING: Refer to Material Safety Date Sheet (MSDS) for complete information. WASHUP SOLVENT: T-125 Wash up or equivalent. / SC-510 Biodegradable wash up. (Non-Petrochemical) MODIFIERS: PFGP-081 – Clear Extender Base / PFGP-084 – Softness Enhance / Base RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer COLOR RANGE: All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!

PANTONE® ULTIMATE MIXING SYSTEM (UMX) - QUART STARTER KIT

BUY UMX STARTER KIT AND GET A FREE MIXING SCALE!!(you must add scale to cart discount will apply automatically.)The UMX quart set includes 17 colors in quart containers and 1 Gallon of Pantone UMX mixing white. -------------- This is the most versatile and up to date Pantone mixing system to date. Total Ink Solutions® has invested incredible resources into developing the most accurate and cost-effective way for any shop whether they are small or large to offer custom matched colors, as well as shop created custom colors specific to a client. This new plastisol ink mixing system and software developed by Total Ink Solutions® provides the most accurate way to mix your custom and industry standard colors for popular color matches. ** These inks are designed for 100% cotton, and are not opaque. The UMX system must be printed on an underbase for dark colors, and if you need bleed resistance you must use the BR series ink as an underbase to achieve this All users of this system will have FREE access to the software and mobile apps we have developed over at http://umxsystem.com/ or by clicking the link on our homepage. Details: This ink is designed for spot color prints. When printing on dark colored garments it is best to use a white underbase so the colors are represented accurately. Without a white underbase colors may appear darker due to the garment color. White and other light color garments can be applied directly without the need of a white underbase. Curing Instructions: Flash at 230°F for 4 - 7 seconds and cure at 320° for 30 - 45 secondsF. Clean Up: Ink degradent or press wash. Storage Information: Store the product in a temperature controled room, and keep out of direct sunlight or high temperatures. Store in an area that is at room temperature for best storeage.

BLEED RESISTANT PLASTISOL INK - BASE

Bleed Resistant Plastisol Ink Phthalate Free, Highly pigmented Superb Opacity for dark backgrounds Ideal for printing on bleed-prone textile substrates In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) Section 108 Phthalates (<.1 dbp dehp> STOCK, END-USE: Cotton, 50/50 cotton/polyester blends, and some synthetics. DESCRIPTION: Bleed Resistant Plastisol Ink/PF-BR Series is popularized for its Bleed Resistant characteristics on dark-colored or bleed-prone textiles. It assures non-migration of fabric dye into the print and leaves a very high opaque, soft-hand finish. Bleed Resistant Plastisol Ink/PF-BR Series is ready-to-use straight from the container. Important Note: Bleed Resistant Plastisol Ink/PF-BR Series may not be used for heat transfer applications. Stir ink before using especially if separation occurs during storage. Always store container with lid on to ensure consistently smooth viscosity. Note: Pre-test on actual substrates before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects. FINISH: Durable, soft-hand finish. COLORS: Available low-bleed opaque colors. SCREEN FABRIC: Mesh counts up to 160 monofilament polyester (64T European Mesh). STENCIL: Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent. CURE/DRYING: Heat-cure at approximately 320°F (160°C) for 1 to 3 minutes. Will not air-dry. MODIFICATIONS: In situations where bleed resistance and opacity is not crucial, extend with PF-GP 081 Clear Extender Base for longer ink mileage. To reduce ink viscosity with RE-703 or RE-704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE-705 can be added up to 10-20% (by weight of ink) if Bleed Resistance, Opacity color shade is not crucial. SQUEEGEE: When printing textiles, use a medium hard (65-75 durometer) squeegee. STORAGE: Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings. PACKAGING: 1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters) SAFETY & HANDLING: Refer to Material Safety Date Sheet (MSDS) for complete information. WASH UP SOLVENT: T-125 Wash-up or equivalent. / SC-510 Bio. Wash-up. (Non-Petrochemical) MODIFIERS: PF-GP081 – Clear Extender Base / RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer COLOR RANGE: All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!

FRANMAR® RED BIGGEE SCRUB PAD (GENTLE) AND HANDLE

This Reusable Scrub Pad and Handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle completing the scrub brush. It’s a great money saver in any shop because this handle will outlast several replaceable pads so each time a pad goes bad you only have to replace the pad, not the brush. We recommend getting several extra pads per handles; this way when your pad goes bad you will have one on hand when it needs to be replaced. Includes 1 red scrub pad with handle

OPTI-925 MILD LACQUER WASHUP

Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics. Excellent Printability and Resolution, Durability and Mar Resistant for exposure Excellent for vacuum forming. Mild-odor, formulated using only non-leaded pigments STOCK, END-USE: ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics DESCRIPTION: 10000 Series screen Ink is formulated for a wide variety of plastic printing applications. 10000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971. To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly). For Spraying Application, Use T-690 Spraying Thinner For removing misprint without surface damage, Use T-625 QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-922 Biting Solvent: 2-3% T-970B Fast Thinner: 5-15% T-971 Slow Thinner: 5-15% T-980/T-999 Retarder: 2-3% FA 011 Flow Agent: 1/2% to 1% All mixing proportions are measured by weight. CLEAN UP:, T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up. (Non-petrochemical) PACKAGING: 1-quart (0.945 Liter), 1- gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.