LATEX GLOVES - LARGE

ALL ALUMINUM PRO-ANGLE 1 SCOOP COATER

Always order a Scoop Coater 1" larger than the area you are coating with liquid. For example, a 10" Scoop Coater covers a 9" liquid coating area. Your coating area should be 2" (1" on each side) larger than your copy or print area. Thus, for optimum results, the Scoop Coater is a total of 3" larger than your print area. Scoop Coaters work best when the coating edge is cleaned after each use with a cloth dampened with warm water. The emulsion must always be covered with plastic or cardboard on the coating trough while liquid is in the Scoop Coater unit. The Scoop Coater has a special rubber edge protector that should be attached when it is not in use. It protects the edge against nicks that can damage your fabric.

T-SQUARE PALLET RULER

ATHLETIC 100% POLYESTER PLASTISOL INK - COLORS-QUART

Athletic Plastisol Ink Series Total Ink Solutions® ATHLETIC Series is a phthalate free plastisol ink that has a high opacity and EXTRA bleed resistant formulation to go along with its amazing stretch properties in this formulation to make this the ultimate choice when working with athletic apparel. Alert:Looking for a specific color? We can match PANTONES or competitor's colors.Copy & Paste link below:https://www.totalinksolutions.com/products/color-match-quart Features: Vibrant colors. Creamy Inks. High Opacity EXTRA Bleed Resistant. Soft hand prints. LOW Cure. Short flash times. STRETCHABLE Stock Use: 100% Polyester Details: Designed to be used on up to a 100% Polyester substrates and athletic uniforms. This ink can be used on any substrate form 100% cotton through 100% polyester. The ink has a short flash time along with a great hand on athletic apparel. There is also a stretch property built into this product which allows for comfort and durability when used on athletic apparel. For the best color output, it is suggested to use a white base on dark garments, use an under base white such as our ATHLETIC White. Curing Instructions: Flash at 210°F (99°C) for 3 - 5 seconds and cure at 280°F (137°C) – 300°F (148°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

EMPTY GALLON

Empty Gallon

CURABLE INK REDUCER - QUART

Curable Reducer is a viscosity reducer that will cure within a standard plastisol temperature range allowing the viscosity of plastisol inks to be lowered without fear of over reducing, resulting in ink curing problems. It thins out your inks and also reduces ink buildup on the bottom of your screens. Non-Phthalate (NP) Curable Reducer lowers the viscosity of plastisols without affecting the fusing characteristics. Curable reducer, which means it fuses or cures by itself with the application of heat. The recommended proportion is 1% to 10% by weight. This reducer should not be used in low bleed inks as it can lower the bleed resistance of those inks.

BLACK FACE MASK

Mask size: 6.5" Wide X 5" Height Material: 60% Cotton / 30% Polyester / 10% Lycra Printable blank face masks that can be decorated with Screen Printing, DTG Printers or Heat Transfer Vinyl.

PMI SPLIT TAPE - 3 INCHES

PMI Split Tape greatly reduces the time it takes to reclaim your screen frames, therefore you’re able to process more orders in a day. Instead of having employees spend their valuable time with the frustrating task of peeling tape, they can effortlessly remove the PMI Split Tape and get the frame ready for the next job. The patented PMI Split Tape is used by screen printers all over the world. The tape is used to mask out the inside of a screen print frame. The blue areas on the tape contain no adhesive to keep your frames clean and free of adhesive residue. The tape is easy to remove without breaking, tearing or shredding. It eliminates the need for costly labor and solvents to clean frames. 3" PMI Split Tape Width Length 60 yds.

EMPTY QUART SPRAY BOTTLE

Empty Spray Bottle