MEGA INKJET WATERPROOF FILM ROLL - 24" WIDTH X 100'

BLUE INFUSED SHIMMER PLASTISOL

Shimmer Plastisol Ink Series Total Ink Solutions® Shimmer Series is a phtalate free plastisol ink that creates a simulated glitter / metallic look, but with the ability to still print through a 110 Mesh Screen. This series is the ultimate choice when looking to add some sparkle to your client’s project. Alert:Looking for a specific color? We can match PANTONES or competitor's colors. Click Here to Order. Features: Vibrant colors. Double Hit NO UNDERBASE required. Opaque. Smooth Surface Excellent adhesion. Stock Use: 100% Cotton 50% Cotton / 50% Polyester Details: Print ease with ease by using the correct mesh screen. There is no need for an underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the shimmer ink at 220°F (105°C) for 3 - 5 seconds prior to printing your next color. The shimmers reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production. MESH: We suggest an 86 - 110 mesh screen for the Shimmer Series of inks. Curing Instructions: Flash at 220°F (105°C) for 3 - 5 seconds and cure at 320°F (160°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

MEGA INKJET WATERPROOF FILM ROLL - 36" WIDTH X 100'

MEGA Films Waterproof Inkjet Film Roll A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment 100' Waterproof Inkjet Film Roll Available in 17″, 24″, 36" and 44" Widths

MEGA INKJET WATERPROOF FILM ROLL - 17" WIDTH X 100'

MEGA Films Waterproof Inkjet Film Roll A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment 100' Waterproof Inkjet Film Roll Available in 17″, 24″, 36" and 44" Widths

MEGA INKJET WATERPROOF FILM ROLL - 44" WIDTH X 100'

MEGA Films Waterproof Inkjet Film Roll A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment 100' Waterproof Inkjet Film Roll Available in 17″, 24″, 36" and 44" Widths

ALL ALUMINUM PRO-ANGLE 1 SCOOP COATER

Always order a Scoop Coater 1" larger than the area you are coating with liquid. For example, a 10" Scoop Coater covers a 9" liquid coating area. Your coating area should be 2" (1" on each side) larger than your copy or print area. Thus, for optimum results, the Scoop Coater is a total of 3" larger than your print area. Scoop Coaters work best when the coating edge is cleaned after each use with a cloth dampened with warm water. The emulsion must always be covered with plastic or cardboard on the coating trough while liquid is in the Scoop Coater unit. The Scoop Coater has a special rubber edge protector that should be attached when it is not in use. It protects the edge against nicks that can damage your fabric.

MEGA INKJET WATERPROOF FILM ROLL - 14" WIDTH X 100'

MEGA Films Waterproof Inkjet Film Roll A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment 100' Waterproof Inkjet Film Roll Available in 17″, 24″, 36" and 44" Widths

ECO MIST SPRAY ADHESIVE 12OZ

AlbaChem Eco Mist Adhesive is an inexpensive all purpose textile adhesive spray. Good for screen printers, embroiderers, and apparel manufacturers. • Does Not Contain Hexane • Flash Resistant (for screen printers) • Low Odor • Minimal Overspray • Great Pattern Hold Adhesive (for apparel manufacturers) • Multi-Use AlbaChem Eco Mist is available in two versions: #1782 Standard Formula and #1782C Eco Mist (CARB) for use in California

MEGA INKJET WATERPROOF FILM SHEETS - 13" X 19"

MEGA Films Waterproof Inkjet Film Sheets A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment Package Size: 13" X 19" – 100 sheets / package