PALLET PROTECT PAPER TAPE - 16 INCHES

PMI SPLIT TAPE - 2 INCHES

PMI Split Tape greatly reduces the time it takes to reclaim your screen frames, therefore you’re able to process more orders in a day. Instead of having employees spend their valuable time with the frustrating task of peeling tape, they can effortlessly remove the PMI Split Tape and get the frame ready for the next job. The patented PMI Split Tape is used by screen printers all over the world. The tape is used to mask out the inside of a screen print frame. The blue areas on the tape contain no adhesive to keep your frames clean and free of adhesive residue. The tape is easy to remove without breaking, tearing or shredding. It eliminates the need for costly labor and solvents to clean frames. 2" PMI Split Tape Width Length 60 yds.

PALLET PROTECT PAPER TAPE - 18 INCHES

Pallet Protect Paper Tape Features Never clean your platens again! Save hours of messy and unhealthy cleaning with solvents. Just pre-cover your pallets with one or more layers of this smooth protective tape and simply remove and dispose of when the surface is built up with residue. No more expensive solvent, no mess and more importantly extend the life of the printing surface. This self adhesive, heat resistant tape is a must for extending the life of you printing pallets as well as reducing the time taken to clean them. Roll length 100 Yards Material: Natural colored paper (4 mil) Size: 18" Wide

WATERBASE FLUORESCENT - CHARTREUSE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

PALLET PROTECT PAPER TAPE - 24 INCHES

Pallet Protect Paper Tape Features Never clean your platens again! Save hours of messy and unhealthy cleaning with solvents. Just pre-cover your pallets with one or more layers of this smooth protective tape and simply remove and dispose of when the surface is built up with residue. No more expensive solvent, no mess and more importantly extend the life of the printing surface. This self adhesive, heat resistant tape is a must for extending the life of you printing pallets as well as reducing the time taken to clean them. Roll length 100 Yards Material: Natural colored paper (4 mil) Size: 24" Wide

WOOD SCREEN PRINTING SQUEEGEE - 60 DUROMETER

All Total Ink Solutions® squeegees are made from high quality polyurethane blades. Total Ink Solutions® carries four different types of squeegee durometer: 60 durometer (Red), 70 durometer (Yellow), 80 durometer (Dark Green), and 70/90/70 triple durometer. Squeegee durometer is the squeegee "hardness," that determines the amount of pressure required to push ink through mesh. In general, soft squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount.

CLEAN-UP CARD - CASE OF 1500

Clean screens, squeegees and scoop coaters Apply bulk adhesive to pallets Apply block out to screens Optimum ink cleaning edge for screens and squeegees Made from specially engineered polyethylene impregnated cardboard 1. Stop wasting time cleaning your cleaning tools! It costs nearly 50 cents in labor, towels and solvent to clean a reusable ink tool. Time is money, so don't waste time cleaning.2. Multi-purpose: Remove Ink from Screens Squeegees Scrape Clean Easily Remove Emulsion from Scoop Coater Spread Water-based Pallet Adhesive Apply Blockout to Screens 3. Disposable - Use it and lose it. You don't make money cleaning!4. Strong - Scoops thick ink + chemical resistant.5. Clean-Up Card Dimensions: 3.5'' x 3.5''

BLEED RESISTANT PLASTISOL INK - COLORS-QUART

Bleed Resistant Plastisol Ink Series Total Ink Solutions® BR Series is a phthalate free plastisol ink that has a high opacity and bleed resistant formulation to go along with our extremely vibrant colors, and being the creamiest ink in the industry. This ink has been chosen time after time as one of the best in the industry by users all over the country! Try it out in your shop today and see what everyone is talking about! Alert:Looking for a specific color? We can match PANTONES or competitor's colors.Copy & Paste link below:https://www.totalinksolutions.com/products/color-match-quart Features: Vibrant colors. Creamy Inks. High Opacity Bleed Resistant. Soft hand prints. Short flash times. Stock Use: 100% Cotton 50% Cotton / 50% Polyester Details: Designed for single and multiple color jobs, with a print flash print on up to a 50% Cotton / 50% Polyester substrate. You can use this product on a range of substrate colors ranging from light to darks with the same effect and high opacity. For the best color output, it is suggested to use a white base on dark. For bleed resistance, use an under base white such as our 5 Star Bright White. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 330°F (165°C). Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

CLEAR TAPE - 1.7 MIL, 3" X 110 YDS, CLEAR

Clear Tape CHARACTERISTICS Aggressive hot melt adhesive for masking the edges of your screen after the emulsion or stencil has been applied. Clear Tape leaves no residue and is easy to remove. APPLICATIONS Temperature range: 45F – 120F PACKAGING Available in 2″ and 3″ Rolls.