BLACKBOARD® 15"

SHIPTECTION SHIPPING PROTECTION

Protect your shipment that are lost, broken, or stolen. ShipTection Shipping Insurance

BLACKBOARD® 12"

Write it, Wipe it, Repeat! Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard heat transfer vinyl by Siser, transforms plain materials into a walking chalkboard without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. This revolutionary material only needs 275°F of heat with medium pressure for just 15 seconds to create a machine washable chalkboard! With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials. Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl. BlackBoard is CPSIA Certified so you can decorate children’s items with peace of mind. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Cutter Settings Cricut: Blade: Standard Setting: Paper Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 5 Force: 8 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 70-80 Offset: .250 Speed: 50 cm/s Graphtec: Blade: 45° Gram-Force: 7-8 Tool: CB09+0 Speed: 50 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 60-65 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier warm (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 275°F/135°C Use medium pressure for 15 seconds Peel carrier warm (at least 15 seconds off press) Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

PANTONE® ULTIMATE MIXING SYSTEM (UMX) - QUART STARTER KIT

BUY UMX STARTER KIT AND GET A FREE MIXING SCALE!!(you must add scale to cart discount will apply automatically.)The UMX quart set includes 17 colors in quart containers and 1 Gallon of Pantone UMX mixing white. -------------- This is the most versatile and up to date Pantone mixing system to date. Total Ink Solutions® has invested incredible resources into developing the most accurate and cost-effective way for any shop whether they are small or large to offer custom matched colors, as well as shop created custom colors specific to a client. This new plastisol ink mixing system and software developed by Total Ink Solutions® provides the most accurate way to mix your custom and industry standard colors for popular color matches. ** These inks are designed for 100% cotton, and are not opaque. The UMX system must be printed on an underbase for dark colors, and if you need bleed resistance you must use the BR series ink as an underbase to achieve this All users of this system will have FREE access to the software and mobile apps we have developed over at http://umxsystem.com/ or by clicking the link on our homepage. Details: This ink is designed for spot color prints. When printing on dark colored garments it is best to use a white underbase so the colors are represented accurately. Without a white underbase colors may appear darker due to the garment color. White and other light color garments can be applied directly without the need of a white underbase. Curing Instructions: Flash at 230°F for 4 - 7 seconds and cure at 320° for 30 - 45 secondsF. Clean Up: Ink degradent or press wash. Storage Information: Store the product in a temperature controled room, and keep out of direct sunlight or high temperatures. Store in an area that is at room temperature for best storeage.

EASYWEED™ HEAT TRANSFER VINYL 59" MATTE - 50 YARDS

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. Siser® EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

WATERBASE FLUORESCENT - CERISE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

EASYWEED™ HEAT TRANSFER VINYL 59"

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

CLEAR TAPE - 2 MIL, 2" X 110' CLEAR

Clear Tape CHARACTERISTICS Aggressive hot melt adhesive for masking the edges of your screen after the emulsion or stencil has been applied. Clear Tape leaves no residue and is easy to remove. APPLICATIONS Temperature range: 45F – 120F PACKAGING Available in 2″ and 3″ Rolls.

EASYWEED™ HEAT TRANSFER VINYL 20"

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is Siser® EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. Siser® EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified