Siser® EasyPatterns® Plus Heat Transfer Vinyl
Pre-Masked Patterns that are Easier to Use!
Siser® Plus are the wow factor you’re looking for! These pre-printed, pre-masked patterns eliminate the need for layering multiple solid colors, therefore eliminating extra weight on the garment! Available in styles ranging from classic to cool, there’s bound to be a pattern that’s perfect for your
next project. Siser® Easypatterns Plus were designed to fit into variety of vinyl cutters as easily as they fit into a variety of niches and trends. Simply cut your design like our other HTV materials, and weed away the excess material from the built-in carrier. Mix and match Easypatterns Plus with other types of Siser HTV for extraordinary styles. Just be sure to keep Siser® Easypatterns Plus as the top layer for best results. With a semi gloss finish and soft hand, Siser® EasyPatterns are the star of the show even when
applied with a home iron!
EasyPatterns are CPSIA Certified so you can decorate kids’ items with confidence.
Specifications
PU composition
• Pressure sensitive backing
• Semi-gloss finish
• 100 Microns/3.9 Mils
• 45°/60° blade
Cutter Settings
Cricut:
Blade: Standard
Setting: Iron-On
Silhouette Cameo:
Blade: Standard, 3
Material: Heat Transfer, Smooth
Material: Smooth
Speed: 8
Force: 6
Scan N Cut:
Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 2
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: 250
Speed: 25-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 9
Tool: CB09U 0
Speed: 25 cm/s
Titan 2 & 3
Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies
Applications Instructions
Application Instructions (home iron)
• Mirror design and cut according to your cutter’s settings
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron) for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)
• Cut material – MIRROR!
• Weed excess material
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
Recommended Accessories & Care
EasyPatterns Applies to:
100% cotton
Poly/cotton blends
100% polyester
Leather
Recommended Accessories:
Siser Weeder
Laundering:
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Do not bleach