EASYWEED™ HEAT TRANSFER VINYL 59" MATTE - 50 YARDS

EASYWEED™ HEAT TRANSFER VINYL 59"

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ HEAT TRANSFER VINYL 20"

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is Siser® EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. Siser® EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

SISER® EASYWEED® HEAT TRANSFER VINYL 15"

Our Best-Selling Heat Transfer Vinyl for T-Shirts Why is EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessorie. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ HEAT TRANSFER VINYL 12"

Our Best-Selling Siser® Heat Transfer Vinyl for T-Shirts Why is Siser® EasyWeed™ our number one selling cuttable heat transfer vinyl material? Simple, The EasyWeed™ Advantage! EasyWeed™ applies at a lower temperature, can be peeled HOT or COLD and doesn't lift during weeding. It's also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed™ is thinner than our competitor's material and offers a one-step application that's great for multiple layers. EasyWeed's pressure-sensitive carrier allows you to offer detailed designs on a variety of fabrics. Siser® EasyWeed™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ STRETCH 15"

Putting the “Performance” in Performance Wear. Performance wear has met its match! Siser EasyWeed™ Stretch delivers all the benefits of our EasyWeed™ heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed™ Stretch has an ultra-matte finish and a soft hand that’s available in 21 popular colors, including silver and gold. EasyWeed™ Stretch is laminated onto a pressure-sensitive carrier that allows for cutting and weeding detailed designs. Siser® EasyWeed™ Stretch is CPSIA Certified, so it's safe on garments for all ages! Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Lycra/spandex Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 60-70 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 9-10 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 90 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with firm pressure (do not slide iron) Press each section of design for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use firm pressure for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ HEAT TRANSFER VINYL STRETCH 20"

Putting the “Performance” in Performance Wear. Performance wear has met its match! Siser EasyWeed™ Stretch delivers all the benefits of our EasyWeed™ heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! The thinnest of any Siser material, EasyWeed™ Stretch has an ultra-matte finish and a soft hand. EasyWeed™ Stretch is laminated onto a pressure-sensitive carrier that allows for cutting and weeding detailed designs. Siser® EasyWeed™ Stretch is CPSIA Certified, so it's safe on garments for all ages! Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Lycra/spandex Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 60-70 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 9-10 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80-85 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 90 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with firm pressure (do not slide iron) Press each section of design for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use firm pressure for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ HEAT TRANSFER VINYL EXTRA 15"

Our Best-Selling Siser® Heat Transfer Vinyl - Now for Nylon! Siser® EasyWeed Extra has almost all the same great benefits of EasyWeed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier which makes cutting detailed logos and designs a breeze. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra - with its semi-gloss finish, can be layered, extending your creativity and allowing you to say "yes" to more complicated designs. EasyWeed Extra is CPSIA Certified, so it's perfect for decorating items intended for children. Compatible Materials Nylon 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80 Speed: 30mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet

EASYWEED™ HEAT TRANSFER VINYL EXTRA 59" 50 YARD

Our Best-Selling Heat Transfer Vinyl - Now for Nylon! EasyWeed Extra has almost all the same great benefits of EasyWeed with the bonus of adhering to nylon! EasyWeed Extra is on a pressure-sensitive carrier which makes cutting detailed logos and designs a breeze. The ability to peel your designs HOT or COLD offers you the option to peel each item as it comes off the press, or to stack all applied garments and peel after the job is complete. Looking to provide multi-color designs for your customers? EasyWeed Extra - with its semi-gloss finish, can be layered, extending your creativity and allowing you to say "yes" to more complicated designs. Siser® EasyWeed Extra is CPSIA Certified, so it's perfect for decorating items intended for children. Compatible Materials Nylon 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 80-90 Offset: .250 Speed: 25-50 cm/s Graphtec: Blade: 45° Gram-Force: 8-9 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 80-85 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 80 Speed: 30mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 80 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 305°F/150°C Use medium pressure for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier hot or cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet