Siser® offers an alternative to those who are looking for a smooth glitter HTV. Sparkle’s appearance and feel is very similar to our now-discontinued material VideoFlex Glitter. Containing a mix of embedded colored and silver glitter flakes, Sparkle also comes on a pressure-sensitive (sticky) backing to make weeding a breeze. Additionally, Sparkle is our thinnest glittery HTV, measuring in at just 120 microns. This not only achieves for a soft, lightweight feel but also allows for some flexibility on more stretchy garments. Finally, Sparkle can be layered on itself along with materials in the EasyWeed family.
Compatible Materials
- 100% Cotton
- 100% Polyester
- Poly/Cotton Blends
- Leather
Cutter Settings
Cricut:
- Blade: Standard
- Setting: Iron-on
Silhouette Cameo:
- Blade: Standard, 2
- Material: Heat Transfer, Smooth
- Speed: 8
- Force: 4
Brother Scan N Cut:
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 1
Other Cutter Settings
Roland GS/GX-24:
- Blade: 45°
- Gram-Force: 80-90
- Offset: .250
- Speed: 25-50 cm/s
Graphtec:
- Blade: 45°
- Gram-Force: 8-9
- Tool: CB09 0
- Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
- Blade: 45°/60°
- Gram-Force: 80-85
- Speed: 300mm/s
- Blade Advancing Varies
Titan 2 & 3:
- Blade: 45°/60°
- Gram-Force: 80-85
- Speed: 300mm/s
- Blade Advancing Varies
Mimaki CG-60SR III:
- Blade: 45°/60°
- Gram-Force: 90
- Offset: 30
- Speed: 20-30mm/s
Application Settings
(Home Iron)
- Set iron dial between Cotton and Linen
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 second
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
(Heat Press)
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- Peel carrier hot or cold
Accessories and Laundering
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold/mild detergent
- Do not dry clean
- Dry on normal dryer setting
Recommended Accessories:
- Siser Weeder
- Multipurpose paper or Heat transfer cover sheet
