UV-1000 SERIES MULTI-PURPOSE INK - QUART

UV-1000 SERIES MULTI-PURPOSE INK - GALLON

UV-1000 Series Multi-Purpose Ink – Formulated with UV Protection for Streetscapes, Light-Pole Banners & Awnings UV-1000 Series Multi-Purpose Ink Phthalate Free, Ideal for printing on bleed-prone textile substrates Excellent Opacity and Bleed Resistance Made with Sunbrella® Woven Acrylic Fabric Specially formulated with UV Protection Materials for Streetscapes, Light-Pole Banners and Awnings Three year test under the strong UV Light (UV Light A and B) and harshest weather shows the excellent color fade and weather resistance as well as strong adhesion without bonding agent In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp> STOCK, END-USE: Nylon, Canvas, Banner and Heat Sensitive Fabrics. FINISH: High-gloss. LIGHT FASTNESS: Excellent / 7-8 for selected colors WEATHER FASTNESS: Excellent / 3-4 for outdoor (12-month periods) COLORS: Standard Colors, plus 32 Pantone Colors available COVERAGE: Approximately 3,000 square feet (363m ) per gallon. STENCIL: Dual cure direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. SCREEN FABRIC: 86-200T Polyester Monofilament CURE/DRYING: 1 to 3 minutes under infrared heat. Heat Cure at approximately between 275-285ºF UV-1000 Series Multi-Purpose Ink is formulated for ready to use from container. NOTE: UV-1000 Series Multi-Purpose Ink does not cause heat damage on fabrics. MODIFICATION: To improve print-ability, RE-704 or RE-705 Reducer may be added up to proper recommended amount. For the additional properties of adhesion or film strength, Bond 992 Catalyst (Solid Liquid) can be added. PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters). SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information. WASH UP SOLVENTS: T-925 Wash up

UV-5000 SERIES MULTI-PURPOSE INK - QUART

Superior adhesion to a wide variety of Glass, Metal and Rubber. UV-5000 Series Multi-Purpose Ink Superior adhesion to a wide variety of Glass, Metal and Rubber Fast curing formulation allows high speed production High resistance to chemicals, scuffing or marring Designed for Indoor Purpose In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp> STOCK, END USE: ABS, Polystyrene, Glass, Metal and Rubber DESCRIPTION: UV-5000 Series Multi-Purpose Ink is a high quality, UV ink used in printing most glass, metal, rubber and some plastic substrates. UV-5000 Series Multi-Purpose Ink is a One part system, ready to use straight from the container. Note: Pre test on actual substrate before any full production run. FINISH: High gloss. COLORS: Available in opaque and transparent colors. All colors are formulated with non-leaded pigments. COVERAGE: Approximately 3,000 square feet (363m2) per gallon. FLEXIBILITY: Not applicable. SCREEN FABRIC: Mesh counts 355-390 (139T-153T/cm European) monofilament polyester for most applications. Use mesh count 305 (122T European) when printing with fine metallic powders. STENCIL: Dual cure direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. CURE: UV curing required. Use one or more 200 or 300 , 600 watt mercury vapor lamp MODIFICATION: To extend color and/or reduce pigmentation, add UV-5790 Clear Base. For printing fine lines and 4 color process halftones, add UV-5800 Halftone Base. To improve ink flow, add 1 % to 2% (by weight of ink) FA-01 Flow Agent. To reduce ink’s viscosity, add approximately 2 to 8% (by weight of ink) UV-RE100 PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *Drums available in 30-gallon (113.4 Liters) and 55-gallon (207.9 Liters). SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information. CLEAN UP SOLVENTS: T-902/925 Lacquer Wash-up / T-911 Vinyl Wash-up / SC-500 Biodegradable Wash-up / SC-510 Biodegradable Wash-up (Soybean and Corn Ester based) MODIFIERS: UV-5790 Clear Base / UV-5800 Halftone Base / FA-016 Flow Agent / UV-RE100 Reducer

UV 1000 SERIES MULTI-PURPOSE UV CURABLE SCREEN INK - QUART-REDUCER

Superior adhesion to a wide variety of substrates lessens ink inventory Excellent Printability and Resolution, Durable Mar Resistant for exposure Strong Alcohol Resistant Properties In compliance with California Prop. 65 and RoHs STOCK, END-USE: Coated Paper, ABS. Butylate, cardboard, hardboard, polystyrene, PMMA, Pyroxylin, top-coated polyester, Soft & Rigid vinyls Polyester: PET/PET-G/PETE DESCRIPTION: UV 1000 Series is a high-quality, multi-purpose UV ink used in printing most paper and a variety of plastic substrates UV 1000 Series renders the versatility in multiple applications such as P-O-P displays and signs, industrial, packaging container and more. Available in pre-mixed, one part system, ready-to-use straight from the container. Note: Pre-test on actual substrate before any full production run. FINISH: High-gloss. COLORS: Available in opaque and transparent colors. All colors are formulated with non-leaded pigments. COVERAGE: Approximately 3,000 square feet (363m2) per gallon. SCREEN FABRIC: Mesh counts 355-465 (142T-186T European) monofilament polyester for most applications. Use mesh count 305-355 (142T European) when printing with fine metallic powers.

UV 1000 SERIES MULTI-PURPOSE UV CURABLE SCREEN INK - QUART-SUPER WHITE

Superior adhesion to a wide variety of substrates lessens ink inventory Excellent Printability and Resolution, Durable Mar Resistant for exposure Strong Alcohol Resistant Properties In compliance with California Prop. 65 and RoHs STOCK, END-USE: Coated Paper, ABS. Butylate, cardboard, hardboard, polystyrene, PMMA, Pyroxylin, top-coated polyester, Soft & Rigid vinyls Polyester: PET/PET-G/PETE DESCRIPTION: UV 1000 Series is a high-quality, multi-purpose UV ink used in printing most paper and a variety of plastic substrates UV 1000 Series renders the versatility in multiple applications such as P-O-P displays and signs, industrial, packaging container and more. Available in pre-mixed, one part system, ready-to-use straight from the container. Note: Pre-test on actual substrate before any full production run. FINISH: High-gloss. COLORS: Available in opaque and transparent colors. All colors are formulated with non-leaded pigments. COVERAGE: Approximately 3,000 square feet (363m2) per gallon. SCREEN FABRIC: Mesh counts 355-465 (142T-186T European) monofilament polyester for most applications. Use mesh count 305-355 (142T European) when printing with fine metallic powers.

OPTI-911 WASH UP THINNER

Ideal for most flexible vinyl stocks Exceptional Adhesion onto most Hard PVC and pressure sensitive vinyls Very Mild Odor-No Aggressive Solvent Exterior Durability (Long Lasting Protection) In compliance with California Prop. 65 and RoHs STOCK, END-USE: Most Vinyl Substrates, Rigid PVC. Pressure-Sensitive Decals, Coated Polyester (Mylar®). Note: Certain Vinyl Plastic Coatings Moldings, Castings, and Extrusions may contain (incompatible materials with 40000 Series ink. DESCRIPTION: 40000 Series screen ink is formulated for a wide variety of High Plasticized Vinyl Substrates. 40000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T/cm European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Airdry: in approximately 20-30 min. Jetdry: in 40 to 60 seconds at 150° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 40928 Match Base. For printing fine details, add 40PC850 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA-011 Flow Agent For best printing results, 40000 Series should be reduced 5-10% (by weight) with T-182 or T-920 or T975 To prevent ink drying under hot & humid conditions, add 3-5% (by weight) T-922 or T-934B (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-182 or T-920 or T-975 5-10% T-922 or T 934B 3-5% FA-011 1/2 to 1% (All mixing proportions by weight) CLEAN UP: T-902 or T-911 or T925 Wash-up SC-500 Bio. Wash-up SC-510 Instant Bio. Wash-up (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-934B RETARDER

Ideal for most flexible vinyl stocks Exceptional Adhesion onto most Hard PVC and pressure sensitive vinyls Very Mild Odor-No Aggressive Solvent Exterior Durability (Long Lasting Protection) In compliance with California Prop. 65 and RoHs STOCK, END-USE: Most Vinyl Substrates, Rigid PVC. Pressure-Sensitive Decals, Coated Polyester (Mylar®). Note: Certain Vinyl Plastic Coatings Moldings, Castings, and Extrusions may contain (incompatible materials with 40000 Series ink. DESCRIPTION: 40000 Series screen ink is formulated for a wide variety of High Plasticized Vinyl Substrates. 40000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T/cm European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Airdry: in approximately 20-30 min. Jetdry: in 40 to 60 seconds at 150° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 40928 Match Base. For printing fine details, add 40PC850 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA-011 Flow Agent For best printing results, 40000 Series should be reduced 5-10% (by weight) with T-182 or T-920 or T975 To prevent ink drying under hot & humid conditions, add 3-5% (by weight) T-922 or T-934B (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-182 or T-920 or T-975 5-10% T-922 or T 934B 3-5% FA-011 1/2 to 1% (All mixing proportions by weight) CLEAN UP: T-902 or T-911 or T925 Wash-up SC-500 Bio. Wash-up SC-510 Instant Bio. Wash-up (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-912 FAST THINNER

Ideal for most flexible vinyl stocks Exceptional Adhesion onto most Hard PVC and pressure sensitive vinyls Very Mild Odor-No Aggressive Solvent Exterior Durability (Long Lasting Protection) In compliance with California Prop. 65 and RoHs STOCK, END-USE: Most Vinyl Substrates, Rigid PVC. Pressure-Sensitive Decals, Coated Polyester (Mylar®). Note: Certain Vinyl Plastic Coatings Moldings, Castings, and Extrusions may contain (incompatible materials with 40000 Series ink. DESCRIPTION: 40000 Series screen ink is formulated for a wide variety of High Plasticized Vinyl Substrates. 40000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T/cm European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Airdry: in approximately 20-30 min. Jetdry: in 40 to 60 seconds at 150° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 40928 Match Base. For printing fine details, add 40PC850 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA-011 Flow Agent For best printing results, 40000 Series should be reduced 5-10% (by weight) with T-182 or T-920 or T975 To prevent ink drying under hot & humid conditions, add 3-5% (by weight) T-922 or T-934B (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-182 or T-920 or T-975 5-10% T-922 or T 934B 3-5% FA-011 1/2 to 1% (All mixing proportions by weight) CLEAN UP: T-902 or T-911 or T925 Wash-up SC-500 Bio. Wash-up SC-510 Instant Bio. Wash-up (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-920 SLOW THINNER

Ideal for most flexible vinyl stocks Exceptional Adhesion onto most Hard PVC and pressure sensitive vinyls Very Mild Odor-No Aggressive Solvent Exterior Durability (Long Lasting Protection) In compliance with California Prop. 65 and RoHs STOCK, END-USE: Most Vinyl Substrates, Rigid PVC. Pressure-Sensitive Decals, Coated Polyester (Mylar®). Note: Certain Vinyl Plastic Coatings Moldings, Castings, and Extrusions may contain (incompatible materials with 40000 Series ink. DESCRIPTION: 40000 Series screen ink is formulated for a wide variety of High Plasticized Vinyl Substrates. 40000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T/cm European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Airdry: in approximately 20-30 min. Jetdry: in 40 to 60 seconds at 150° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 40928 Match Base. For printing fine details, add 40PC850 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA-011 Flow Agent For best printing results, 40000 Series should be reduced 5-10% (by weight) with T-182 or T-920 or T975 To prevent ink drying under hot & humid conditions, add 3-5% (by weight) T-922 or T-934B (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-182 or T-920 or T-975 5-10% T-922 or T 934B 3-5% FA-011 1/2 to 1% (All mixing proportions by weight) CLEAN UP: T-902 or T-911 or T925 Wash-up SC-500 Bio. Wash-up SC-510 Instant Bio. Wash-up (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.