Screen Printing EquipmentAvailable in three widths, the X1D is the smallest conveyor dryer matched to the output of the most popular DTG printing systems. Its heating chamber has a boost zone to quickly reach cure temperatures for ink jet, water-based and discharge inks.
The LittleRed® X1D-18 with an 18 in. (46 cm) wide conveyor belt has a heating chamber the full width of the belt, and can dry Digital White Ink at rates up to 34 pieces per hour at 2 minutes dwell time, or up to 81 garments/hr with water-based ink or discharge, and cure up to 162 garments per hour with plastisol ink.
The LittleRed X1D-30 with a 30 in. (76 cm) wide conveyor belt features a 24 in. (61 cm) wide heater and can dry Digital White Ink at rates up to 29 pieces per hour at 2 minutes dwell time, or up to 65 garments/hr with water-based ink or discharge, and cure up to 150 garments per hour with plastisol ink.
For larger garments, or to increase production, the LittleRed X1D-54 with a 54 in. (137 cm) wide conveyor belt features a 48 in. (122 cm) wide heater and can dry Digital White Ink at rates up to 38 pieces per hour at 2 minutes dwell time, or up to 162 garments/hr with water-based ink or discharge, and cure up to 324 garments per hour with plastisol ink.
Conveyor dryers eliminate the flattened, ironed-on appearance and halo associated with heat pressing of printed images, and relegates the heat press to flattening of raised fibers prior to printing with a one second ‘touch’ per garment.
As standard it is equipped with features found on the company’s larger DTG capable dryers including adjustable belt-to-heater clearance to accommodate bulky itEquipmentScreen Printing Equipmentems, a dual digital PID temperature controller accurate to /- 1°F, and an X-Series conveyor belt roller tracking system with PTFE coated fiberglass belt.
The powered exhaust system removes moisture and air contaminants at a rate of 280 CFM (7.9 CMM), while cooling the housing and controls.
Compact
Total footprint is as small as 8 sq.ft (2.44 sq.m)
Smart
“X-Series” Conveyor Belt Roller Tracking System with PTFE coated fiberglass belt
Belt Width
(max garment width)
LR-X1D-18 – 18 in. (46 cm)
LR-X1D-30 – 30 in. (76 cm)
LR-X1D-54 – 54 in. (137 cm)
Heater Width
LR-X1D-18 – 18 in. (46 cm)
LR-X1D-30 – 24 in. (61 cm)
LR-X1D-54 – 48 in. (122 cm)
Adjustable
2 – 7 in. (5 – 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater
Cool
High powered exhaust to remove fumes and moisture
Versatile
Can cure garments printed with plastisol, water-based, discharge or Digital White Ink
Accurate
Dual digital PID temperature controller is accurate to /-1 °F
Valuable
Best warranty, high quality, exceptional service
Options
- Additional heating chambers and belt extensions available
- Locking casters for easy mobility
- Creeper gear
Modular expandability allows your dryer to grow with you
The capacity (belt speed) of all Vastex floor standing conveyor dryers can be doubled or tripled as new or when needs increase by simply adding one or two modular heating chambers and extending the conveyor belt. This eliminates the need to invest in a larger dryer than you need at the onset, and avoids the high cost of purchasing a new dryer when your needs increase.
