3D HIGH DENSITY PLASTISOL INK - GALLON

3D High Density Plastisol Ink Series Total Ink Solutions® 3D Series is a phthalate free plastisol ink that has extremely vibrant colors, and a high-density formulation to create amazing 3D printing effects. This is the solution needed for all of your 3D effect printing. Features: Vibrant colors. Creamy Inks. High-Density 3D Effect Stock Use: 100% Cotton 50% Cotton / 50% Polyester Details: Please Allow 48 hours for this product to ship, since it is custom made at the time of order. When direct printing over dark garments no under base is required. The thickness and density of the ink will prevent the dye migration from occurring. Make sure to use a capillary film as suggested below. This is crucial for the printing of the High Density Ink. Stencil Instructions: It should be made with thick capillary film between 200 and 1000 microns. Screen Mesh: Mesh between 15 to 86T monofilament polyester is recommended. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 330°F (165°C). ** NOTE: Excessive Heat applied to 3D print will result in cracking of prints Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

6X8 TWIN LABEL PRESS DK8T

DK8T Digital Knight 6x8 Twin Label Press The DK8T Twin label press is a 6x8 small platen heat press with a high productivity design. The head pivots back and forth between the two pedestals effortlessly. While one side is pressing, the user is able to set up work on the other pedestal and maximize efficiency. This machine is very popular for label printing and small transfer & applique sealing. If your image area is less than 8 inches, and you need to specifically isolate an area of a garment or bag, the tall pedestal on the DK8 allows for precise location of just the area needed to be pressed. Pockets, collars, socks, sleeves and similar areas are easy to press without flattening parts of the garment that should not be pressed. This saves the user from pressing very large areas of bulky items unnecessarily, as would happen on a standard T-Shirt press. The included interchangeable tables allow for isolation of the pressing area down to a mere 3x3 inches. Features High production twin station design Fully digital temperature control 32°-600°F range Automatic digital timer & dual pre-press timer 70 Programmable presets Hardened high-strength pivot points Solid Steel framework SuperCoil-Microwinding™ heater technology 6x8, 3x5, 3x3 Interchangeable tables included Self lifting gas-spring, & wide opening Temperature readout accuracy +-2°F - can show °C or °F User selectable end-of-cycle alarms Records number of pressing cycles done PTFE-coated 3/4" thick heat platen Lifetime warranty on heat platen 3-year warranty on control 1 year warranty on entire press Specifications Weight: 105 Lbs Electrical: 600W / 5A / 110V Dimensions: 22"L x 22"W x 22"H (add $35 for 220V international) Download Clamshell PDF Brochure Download DK7/8 PDF Manual

14X16 AUTO POP CLAMSHELL DK16A

Digital Knight 14x16 AUTO Clamshell The DK16A is the AUTO-RELEASE "Pop-Up" version of our mid-sized manual clamshell. This amazing high-tech feature makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically. The Auto-Release upgrade also features the "HOVER" feature. This means when the handle is lowered without fully clamping the machine, the press will hover over the work, usually needed for curing purposes. At the end of the time cycle the press releases automatically as usual. The DK16A 14x16 clamshell press opens for full access to the lower bottom table. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom tables for smaller pressing areas are available. This press is idea for environments with space limitations, and for users who need more portability and mobility than the over-weight swingaway presses. Features Auto-Release POP-UP automatic open at end of time cycle Auto-Release "Hover" position cures materials without pressing Fully digital temperature control 32°-600°F range Automatic digital timer & dual pre-press timer Digital Pressure Bar Graph Super-portable light machine weight - 83 lbs ! Extreme high pressure capability Hardened high-strength pivot points Interchangeable tables Solid Steel framework SuperCoil-Microwinding™ heater technology Self lifting gas-spring, & wide opening Temperature readout accuracy +-2°F - can show °C or °F User selectable end-of-cycle alarms Records number of pressing cycles done PTFE-coated 3/4" thick heat platen Lifetime warranty on heat platen 3-year warranty on control 1 year warranty on entire press Specifications Weight: 83 Lbs Electrical: 1500W / 12A / 110V Dimensions: 32"L x 17"W x 16"H (add $35 for 220V international) Download DK General Clamshell PDF Brochure Download DK16 PDF Owners Manual

18" TEXTILE DRYER

Cure-Tex™ 18" Textile Dryer Solid state temperature controls Heavy duty chamber insulation Forced air system for even heat distribution Adjustable radiant heat panel height Quality FiberlonTM conveyor belt Adjustable chamber aperture doors conserve heat Plastisol curing from 6 to 8 dozen per hour In feed: 15" (38.1cm) Out feed: 15" Assembled Size: 58.5" L x 28" W x 40" H Shipping Weight: 400 lbs. The Cure-Tex 18" Dryer is designed with the same high quality components as the Cure-Tex 24" Plastisol Textile Dryer. An excellent choice to fit the needs of shops with limited floor space and/or small budgets. The Cure-Tex 18" Dryer is designed with the same high quality components as the Cure-Tex 24" Plastisol Textile Dryer. An excellent choice to fit the needs of shops with limited floor space and/or small budgets. Cat. No Conveyor Width Heat Chamber Electrical Amps List Price Net Crating CT-18-60 18" 28" 208-240 V, 1 Ph, 60 Hz 18.2 $ 2,395.00 $ 150.00

24" DRYER

Top contender in the economy class, the Cure-Tex 24" is a serious textile dryer, engineered with the same quality components as larger infrared units. The Cure-Tex combines solid-state temperature controls and heavy-duty chamber insulation to deliver heat efficiently to the garment and minimize energy consumption. Top-down airflow pattern distributes heat evenly and prevents scorching. Available with an optional side panel. In feed: 24" (Out feed: 24" Assembled Size: 84" L x 39" W x 51"H Shipping Weight: 600 lbs.

45°/.25 OFFSET BLADE, 1 EA. - ALL PURPOSE

This 45° blade is used for cutting standard thickness materials. It is excellent for general purpose cutting of 2-3 mil adhesive backed substrates. The Roland part number USA-C145-1 is compatible with all Roland vinyl cutters and printer/cutters. This item contains 1 vinyl cutter blade.

7010 SERIES (54" WIDE X 50 YARDS) – FDC® LAMINATE: INTERMEDIATE CALENDERED - 000 GLOSS CLEAR

FDC 7010 Series is an intermediate grade calendered vinyl laminate designed for use over calendered vinyl films to provide protection from UV exposure, chemicals and abrasion. This product is ideal for general purpose applications and provides medium-term durability.

6" X 6" POWER PLATEN™

Power Platen - 6" X 20" Reduce the risk of scorching on heat-sensitive substrates with this specialty lower platen that heats garments from below, reducing the need for high heat from the upper platen. With a built-in heat printing pillow, it conforms to any substrate while helping you press across hard-to-print areas, such as buttons and seams. Controller is interchangeable with all 4 sizes of Power Platen - order one or more sizes, plus a controller, or the save with a full set of Power Platens and included controller. The Power Platen is fully Threadable when used with a Heat Press Caddie. Compatible with 16" x 20" Hotronix® Auto Clam, MAXX® Clam, and Air Fusion IQ™ heat presses. (Not compatible with Hotronix Fusion IQ or draw presses). Requires the Power Platen Controller (sold separately).