Create Custom Designs that Glow in the Dark!
EasyWeed Glow™ is a white polyurethane heat transfer vinyl that looks great in the daylight and glows in the dark! Glow is available in white and it cuts and weeds like our popular EasyWeed™ heat transfer vinyl. You “charge” the material by exposing it to sunlight. The more light you give it, the more it glows in the dark! Great for crafters looking to create kids’ pillow cases with messages they can see when they go to bed and great for simple Halloween costumes!
Siser® EasyWeed™ Glow is CPSIA Certified so even little ones can get in on the glow in the dark fun!
Compatible Materials
- 100% Cotton
- 100% Polyester
- Poly/Cotton Blends
- Leather
Cutter Settings
Cricut:
- Blade: Standard
- Setting: Iron-on
Silhouette Cameo:
- Blade: Standard, 2
- Material: Heat Transfer, Smooth
- Speed: 8
- Force: 4
Brother Scan N Cut:
- Blade: Standard, 2
- Cut Speed: 1
- Cut Pressure: 1
Other Cutter Settings
Roland GS/GX-24:
- Blade: 45°
- Gram-Force: 80-90
- Offset: .250
- Speed: 25-50 cm/s
Graphtec:
- Blade: 45°
- Gram-Force: 8-9
- Tool: CB09+0
- Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
- Blade: 45°/60°
- Gram-Force: 80-85
- Speed: 300 cm/s
- Blade Advancing Varies
Titan 2 & 3:
- Blade: 45°/60°
- Gram-Force: 80
- Speed: 300mm/s
- Blade Advancing Varies
Mimaki CG-60SR III:
- Blade: 45°
- Gram-Force: 80
- Offset: 30
- Speed: 20-30mm/s
Application Settings
(Home Iron)
- Set iron dial between Cotton and Linen
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
(Heat Press)
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium pressure for 10-15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier hot or cold
Accessories and Laundering
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold/mild detergent
- Do not dry clean
- Dry on normal dryer setting
Recommended Accessories:
- Siser Weeder
- Multipurpose paper or Heat transfer cover sheet
Certification
- CPSIA Certified
