21:I[45065,["/_next/static/chunks/18b7u-iejqv_b.js","/_next/static/chunks/3hwzwhgdd8ia4.js","/_next/static/chunks/43i2i8tf_qvm1.js","/_next/static/chunks/2vpm_qmz-0w9i.js","/_next/static/chunks/0e8e909m3o3rb.js","/_next/static/chunks/0bulu3mip66kf.js","/_next/static/chunks/0yplkrltcycg6.js"],"CollectionSort"] 22:I[75816,["/_next/static/chunks/18b7u-iejqv_b.js","/_next/static/chunks/3hwzwhgdd8ia4.js","/_next/static/chunks/43i2i8tf_qvm1.js","/_next/static/chunks/2vpm_qmz-0w9i.js","/_next/static/chunks/0e8e909m3o3rb.js","/_next/static/chunks/0bulu3mip66kf.js","/_next/static/chunks/0yplkrltcycg6.js"],"FacetedCollection"] 23:T504,

DTF Hot Melt Adhesive Powder is the TPU bonding powder that turns your DTF prints into soft, stretchy, and durable transfers. Applied over your printed film, it melts into the ink to create a flexible bond that moves with the fabric — no stiff, cracked, or plastic-feeling prints.

Why printers choose it

✔ Soft Hand-Feel — Lightweight and flexible on the garment, not thick or rubbery.
✔ Stretch & Recovery — Moves with the fabric and springs back, ideal for performance and knit apparel.
✔ Built to Last — Strong, wash-durable adhesion that holds up load after load.
✔ Works Across Fabrics — Cotton, polyester, and poly/cotton blends.

Colors & Sizes

Available in White and Black, in 1 Kg, 2 Kg, and 4 Kg resealable bags.

How to use

Print your design on DTF film, apply the powder evenly over the wet ink while it's still tacky, shake off the excess, then cure/melt the powder. Heat-press the finished transfer onto your garment, peel, and give it a final press for maximum wash durability.

24:T494,

Transfer Adhesion Powder is the hot-melt bond between your print and the garment. This thermoplastic (TPU) adhesive powder fuses screen-printed plastisol transfers and DTF prints to cotton, polyester, and blends — for a soft, stretchy, wash-durable hold.

How it works

Dust it onto the wet ink or freshly printed DTF film, shake off the excess, and cure.
The TPU melts and grips the fibers, then locks in as it cools for a bond that survives 50+ washes.
Stays soft and flexible — no cracking when the garment stretches.

Specs

Type: hot-melt TPU adhesive powder.
Melt point: ~225°F; cure to your film/transfer spec (typically 260–320°F).
Use with: DTF film + ink, and screen-printed plastisol transfer inks.
Sizes: 1, 2, 3, 5, 10, and 25 lb.

Pairs well with

Complete the transfer workflow with DTF ink & film and a curing oven or shaker.

DTF Powder & Adhesive

DTF Powder & Adhesive