Ameriflex QuickPrint™ Gloss Silver PU HTV – 20" & 30"

$12.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: QPGPU20S92-1
Roll Width: 20"
Roll Size: 1 Yard

Roll Width

Roll Size

QuickPrint™ Gloss Silver PU Printable Heat Transfer Vinyl

Ameriflex QuickPrint™ Gloss Silver PU HTV is a print-and-cut polyurethane heat transfer vinyl for eco-solvent and solvent printer/cutters. Print full-color designs, contour-cut, weed, and heat-press — all from one durable, flexible high-gloss metallic media.

Finish

A reflective gloss silver base for metallic, eye-catching prints. Available in 20" and 30" widths and roll lengths of 1, 5, 10, 25, and 50 yards.

Why QuickPrint™ Gloss Silver

✔ Print & Cut Ready — Eco-solvent/solvent compatible for vivid, high-resolution prints.
✔ Soft & Flexible — Comfortable hand on the garment.
✔ Durable — Holds color and adhesion wash after wash.
✔ Metallic Gloss — Reflective silver base makes designs stand out.

Application Guide

Material: PU · Thickness: 70 microns
Cut: Not mirrored · 45° blade · 30 cm/s · 100 gf
Temperature: 305°F (150°C)
Press Time: 8–10 seconds
Pressure: Medium
Peel: Cold

Always test first; settings vary by press, printer, and design.

California Proposition 65

AmeriFLEX products do not contain any of the substances on the California Proposition 65 list, or they satisfy the CA Prop 65 Safe Harbor requirements. The Proposition 65 chemical list is available at oehha.ca.gov/proposition-65/proposition-65-list. This statement is for informational purposes only and does not constitute a legal representation.

CPSIA 2008 Compliance

AmeriFLEX formulates its products with quality, safety, and the environment in mind. Based on raw-material supplier information, testing data, and formulation analysis, this product is manufactured in compliance with the following requirements of the 2008 Consumer Product Safety Improvement Act (CPSIA):

16 CFR Part 1303 — Lead in Paint (<90 ppm lead)
CPSIA Section 101 — Lead Content in Substrates (<100 ppm lead)
CPSIA Section 108 — Phthalates (<1000 ppm DEHP, DBP, BBP, DCHP, DHEXP, DIBP, DPENP, DINP)

Compliance is based on raw-material supplier information and the AmeriFLEX formula and may be used for compliance with the regulations listed above. Because products are not analyzed on a regular basis, this statement is provided without formal guarantee; however, based on our experience and knowledge, the purity requirements are fulfilled. AmeriFLEX strongly recommends that each customer and end-user independently determine the suitability of AmeriFLEX products under actual conditions of processing and end-use.

For additional regulatory information, please refer to the Safety Data Sheet (SDS) at www.ameriflexusa.com or contact the AmeriFLEX Regulatory Compliance Department at (732) 584-9300.