EasyPSV® Permanent Glow
Night Time Fun for Everyone!
EasyPSV® Glow is the only pressure sensitive vinyl with a built in spotlight! This mostly white adhesive vinyl has a hint of green to clue you in that the fun begins after dark. Use EasyPSV Glow to illuminate your phone charger or decorate the ceiling with a solar system. Just be sure to layer on top of EasyPSV Removable first, otherwise those planets are a permanent fixture! For luminous creativity every night, use EasyPSV Glow indoors for greatest longevity.
Specifications
Polyester composition
- 90# lay flat liner
- Gloss finish
- 107 Microns/4.2 Mils
- 45°/60° blade
- Can be layered
Cutter Settings
Cricut:
Blade: AutoBlade, Fine-Point
Setting: Vinyl
Silhouette Cameo:
Blade: AutoBlade, 10
Material: Vinyl, Glossy
Speed: 5
Force: 22
Scan N Cut:
Blade: Standard, 3
Cut Speed: 1
Cut Pressure: 2
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Graphtec:
Blade: 45°
Gram Force: 9
Tool: CB09U+0
Speed: 30 cm/s
Titan Series
Blade: 45°/60°
Gram Force: 50-55
Speed: 300mm/s
*Blade Advancing Varies
Application Instructions
• Place EasyPSV™ with the liner side down and cut your design. (DO NOT reverse/mirror your design.)
• Weed excess vinyl.
• Remove the application tape’s paper liner and place tape on top of EasyPSV.
• Burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner.
• Place the application tape on your desired object.
• Burnish with a squeegee to fully adhere the design.
• Gently peel away the application tape, leaving just your EasyPSV design on the object.
• Weed excess vinyl.
• Remove the application tape’s paper liner and place tape on top of EasyPSV.
• Burnish with a squeegee.
• Lift the application tape and EasyPSV away from the paper liner.
• Place the application tape on your desired object.
• Burnish with a squeegee to fully adhere the design.
• Gently peel away the application tape, leaving just your EasyPSV design on the object.
Recommended Accessories & Care
EasyPSV™ Permanent Glow Applies to:
Glass/mirrors
Wood
Plastic
Metal
Ceramic
Recommended Accessories:
Tweezer
Siser Application Tape
Siser Squeegee
Care Instructions:
Not recommended for use on drywall or other painted surfaces.
Not recommended for use near flame/ heat source, or with microwave, and dishwasher.
