EasyWeed™ Stretch Heat Transfer Vinyl - 20"

$14.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: EWS20P5001-1
Color: White
Length: 1 Yard

Color

Length

Siser® EasyWeed® Stretch is built for garments that move. It stretches and rebounds with the fabric instead of cracking or lifting at the edges, which is what ordinary HTV does on leggings, compression tops, and performance knits after a few wears.

It is also the thinnest film in the Siser range, with an ultra-matte surface and a soft, lightweight hand — on a fitted garment you feel the print far less than you would with standard EasyWeed. CPSIA certified for children's apparel.

Features

Stretch and rebound — moves with the fabric and returns to shape.
Thinnest Siser HTV — minimal hand feel on close-fitting garments.
Ultra-matte finish — no shine, reads as part of the garment.
Presses on Lycra® and Spandex as well as cotton, polyester, blends, and leather.
CPSIA certified for children's apparel.

Recommended Fabrics

Lycra® / Spandex
100% Polyester
100% Cotton
Cotton / Polyester blends
Leather

Cutter Settings

Cricut — Blade: Standard · Setting: Iron-on

Silhouette Cameo — Blade: Standard, 4 · Material: Heat Transfer, Smooth · Speed: 8 · Force: 4

Brother ScanNCut — Blade: Standard, 2 · Cut Speed: 1 · Cut Pressure: 1

Roland GS/GX-24 — Blade: 45° · Gram-Force: 60–70 · Offset: .250 · Speed: 30 cm/s

Graphtec — Blade: 45° · Gram-Force: 9–10 · Tool: CB09+0 · Speed: 30 cm/s

Mimaki CG-60SR III — Blade: 45° · Gram-Force: 90 · Offset: 30 · Speed: 20–30 mm/s

This is thin material — run less force than you would on standard EasyWeed, and test cut first.

Application Instructions

Mirror, cut, and weed the design.
Preheat the garment for 2–3 seconds.
Cover with a heat transfer cover sheet or multipurpose paper.
Press at 320°F / 160°C for 20 seconds using firm pressure.
Peel the carrier hot or cold — either works.

Test press on your specific garment first, and stretch-test the result before running an order. Platen temperature often differs from the display reading.

Care Instructions

Wait 24 hours before the first wash.
Machine wash cold, inside out, with a mild detergent.
Tumble dry on a normal setting.
Do not bleach and do not dry clean.

Colors and Sizes

White, Black, and Red
20" wide, sold by the yard

At-a-Glance Specifications

Peel	Hot or cold
Pressure	Firm
Temperature	320 °F (160 °C)
Transfer Time	20 seconds
Substrates	Cotton, Polyester, Poly/Cotton Blends, spandex/lycra activewear