High Opaque Plastisol Ink
- Phthalate Free, Ready to use
- For dark/light-colored fabrics
- Excellent High Opacity (Bleed Resistant Properties)
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) Section 108 Phthalates (<.1 dbp dehp>
Cotton, 50/50 cotton/polyester blends, and some synthetics.
High Opaque Plastisol Ink/PF-HO Series is popularized with its consistent high-opaque print result on dark and light colored textiles. It is a formulation compatible to most plastisol additives For quick and easy modification in many textile applications.
High Opaque Plastisol Ink/PF-HO Series is ready to use straight from the container or can be extended up to 50% for light color applications.
Important Note: High Opaque Plastisol Ink/PF-HO Series colors do not contain bleed inhibitors. When Bleed Resistance is of the utmost concern, use PF-BR Series.
Note: Pre-test on actual substrate before any full production run, for dye bleeding, adhesion, wash fastness and other desired effects.
Durable, soft-hand finish.
Available low-bleed opaque colors; formulated using non-leaded pigments.
Mesh counts up to 355 mono filament polyester (142T European Mesh).
Dual-sensitized direct method photo emulsion or SBQ pre-sensitized photo emulsion or equivalent
Heat-cure at approximately 320°F (160°C) for 2 to 3 minutes. Will not air-dry.
To reduce ink viscosity with RE-703 or RE-704, add 5% or less (by weight of ink). Reducer is to be used very sparingly and only when RE-705 can be added up 10 to 20% (by weight of ink) if color shade or Opacity is not crucial.
When printing textiles, use a medium hard (65-75 durometer) squeegee.
Plastisols respond to heat. Always store at cool room temperatures below 90°F (32°C). Avoid exposing inks to elevated temperatures before printings.
1- quart (0.945 Liter), 1-gallon (3.78 Liters), 5-gallon (18.9 Liters) containers. *30-gallon (113.4 Liters) and 55-gallon (207.9 Liters).
SAFETY & HANDLING:
Refer to Material Safety Date Sheet (MSDS) for complete information.
T-125 Wash up or equivalent. / SC-510 Biodegradable wash up. (Non-Petrochemical)
PFGP-081 – Clear Extender Base / PFGP-084 – Softness Enhance / Base RE-703 – Quick Flash Reducer / RE-704 – Clear Reducer / RE-705 – Curable Reducer
All colors are formulated using non leaded pigments. *Other colors available upon request. Contact us for more details!