TECHNI-PRINT® EZP Heat Transfer Paper produces soft, supple yet vibrant and wash-durable laser printed transfers to white and light colored cotton, cotton/poly blends and 100% poly fabrics. The product can be used to apply photographs or other designs and can be trimmed to reduce the transfer of the polymer background. The product runs through a vast array of fuser oil and oil-less laser printers and copiers and is approved by OKI for use with their printers. This product is also INDIGO Certified for the 7000-1000 series of printers. The product is to be applied only with a commercial press.
Tips and Tricks for the Best Result:
-
PRINTING INSTRUCTIONS: 1. Print the image in reverse/mirrored format using a Heavy paper mode. 2. Trim away the unprinted areas of the transfer if desired.
-
PRE-TRANSFERRING INSTRUCTIONS: 1. Prepare the garment/fabric by ensuring the surface is clean, dry, and wrinkle free by using a lint brush and your heat press.
-
TRANSFERRING INSTRUCTIONS: 1. Place the transfer on top of the garment with the print image against the fabric. 2. Press 30 seconds at 375°F/190°C using using medium to heavy pressure (40 to 70 psi/3 to 5 bar). 3. For best results leave on the heat press, wait 10 to 15 seconds depending upon the fabric and then peel the paper in a smooth even motion (hot peel). 4. To improve the feel or “hand” and get even better wash durability, stretch the garment in all directions while still hot. 5. If desired, wait and peel the paper after cooling completely (cold peel). This method gives a stiffer “hand” but it is quicker and works well for hard surfaces. 6. You can then improve the softness and get even better wash durability by covering the image with parchment paper, repressing for 10 seconds and immediately stretching in all directions while still hot.
