Siser® Holographic Pearl Heat Transfer Vinyl – 20"

$10.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: HG18P5400-1
Color: Pearl
Length: 1 Yard

Color

Length

Siser® Holographic Pearl is the opalescent member of the Holographic family — a soft, shifting pearl finish rather than the hard rainbow flash of the standard Holographic colors. Tilt it and the surface moves through pale greens, pinks, and golds. It is the closest you get to a rhinestone look without setting a single stone.

Holographic is a polyester film measuring 110 microns (4.3 mils). It cuts and weeds like a standard specialty HTV and presses cold peel. We stock it 18" wide, sold by the yard.

Features

Opalescent pearl finish — shifts color with light and movement.
Rhinestone alternative — the sparkle without the labor of individual stone placement.
110 microns / 4.3 mils polyester film.
20" wide — more usable width than a standard 12" roll.
Presses on leather as well as cotton, polyester, and blends.
CPSIA certified, VeganOK, REACH compliant, CA Prop 65, and recyclable.

Recommended Fabrics

100% Cotton
100% Polyester
Cotton / Polyester blends
Leather

Cutter Settings

Cricut — Blade: Standard · Setting: Light Cardstock

Silhouette Cameo — Blade: Standard, 3 · Material: Heat Transfer, Smooth · Speed: 8 · Force: 14

Brother ScanNCut — Blade: Standard, 2 · Cut Speed: 1 · Cut Pressure: 3

Roland GS/GX-24 — Blade: 45° · Gram-Force: 180–190 · Offset: .250 · Speed: 30 cm/s

Graphtec — Blade: 45° · Gram-Force: 17–18 · Tool: CB09U+0 · Speed: 30 cm/s

Always cut mirrored, and test cut before running production.

Application Instructions

Mirror, cut, and weed the design.
Preheat the garment for 2–3 seconds.
Cover the design with a heat transfer cover sheet or multipurpose paper.
Press at 320°F / 160°C for 15–20 seconds using medium pressure.
Peel the carrier cold.

With a home iron, set the dial between Cotton and Linen and press firmly for 10–15 seconds, then peel cold. Test press on your specific garment first — platen temperature often differs from the display reading.