FIG. 01/42Siser

Siser

Siser® EasyWeed® Stretch Heat Transfer Vinyl – 15"

$10.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: EWS155001-1
Color: White
Length: 1 Yard

Color

Length

Siser® EasyWeed® Stretch is built for garments that move. It stretches and rebounds with the fabric instead of cracking or lifting at the edges — which is what ordinary HTV does on leggings, compression tops, and performance knits after a few wears.

It is also the thinnest film in the Siser range, with an ultra-matte surface and a soft, lightweight hand, so on a fitted garment you feel the print far less than you would with standard EasyWeed. CPSIA certified for children's apparel.

Features

Stretch and rebound — moves with the fabric and returns to shape.
Thinnest Siser HTV — minimal hand feel on close-fitting garments.
Ultra-matte finish — no shine, reads as part of the garment.
Presses on Lycra® and Spandex as well as cotton, polyester, blends, and leather.
Layerable for multi-color work on performance fabrics.
CPSIA certified for children's apparel.

Recommended Fabrics

Lycra® / Spandex
100% Polyester
100% Cotton
Cotton / Polyester blends
Leather

Cutter Settings

Cricut — Blade: Standard · Setting: Iron-on

Silhouette Cameo — Blade: Standard, 4 · Material: Heat Transfer, Smooth · Speed: 8 · Force: 4

Brother ScanNCut — Blade: Standard, 2 · Cut Speed: 1 · Cut Pressure: 1

Roland GS/GX-24 — Blade: 45° · Gram-Force: 60–70 · Offset: .250 · Speed: 30 cm/s

Graphtec — Blade: 45° · Gram-Force: 9–10 · Tool: CB09+0 · Speed: 30 cm/s

Mimaki CG-60SR III — Blade: 45° · Gram-Force: 90 · Offset: 30 · Speed: 20–30 mm/s

This is thin material — run less force than you would on standard EasyWeed, and test cut first.

Application Instructions

Mirror, cut, and weed the design.
Preheat the garment for 2–3 seconds.
Cover with a heat transfer cover sheet or multipurpose paper.
Press at 320°F / 160°C for 20 seconds using firm pressure.
Peel the carrier hot or cold — either works.

Test press on your specific garment first, and stretch-test the result before running an order. Platen temperature often differs from the display reading.

Care Instructions

Wait 24 hours before the first wash.
Machine wash cold, inside out, with a mild detergent.
Tumble dry on a normal setting.
Do not bleach and do not dry clean.

Sizes

15" wide (14.75" actual)
1, 5, 10, 25, and 50 Yard rolls

At-a-Glance Specifications

Peel	Hot or cold
Pressure	Firm
Temperature	320 °F (160 °C)
Transfer Time	20 seconds
Substrates	Cotton, Polyester, Poly/Cotton Blends, spandex/lycra activewear