StripFlock® Pro
StripFlock® Pro is a textured HTV that has a suede-like feel, similarly to original StripFlock® Pro. However, this new formulation can now be applied at a lower temperature of 311°F for 15 seconds.
Additionally, StripFlock® Pro can now be peeled hot, which can significantly speed up the application process. Just like the original version, StripFlock® Pro can be layered on itself.
Siser® StripFlock® Pro will be available in 19 colors in both 12” and 15” widths. The original StripFlock® will be gradually phased out, and support will remain until stock is depleted.
StripFlock® Pro contains a small amount of PVC, but it does not contain phthalates.
This means that StripFlock® Pro is also CPSIA certified!
Compatible Materials
- 100% Cotton
- 100% Polyester
- Poly/Cotton Blends
- Leather
Cutter Settings
Cricut:
- Blade: Standard
- Setting: Iron-on+
Silhouette Cameo:
- Blade: Standard, 4
- Material: Heat Transfer, Flocked
- Speed: 5
- Force: 6
Brother Scan N Cut:
- Blade: Standard, 4
- Cut Speed: 1
- Cut Pressure: 2
Other Cutter Settings
Roland GS/GX-24:
- Blade: 45°
- Gram-Force: 80-120
- Offset: .250
- Speed: 30 cm/s
Graphtec:
- Blade: 45°
- Gram-Force: 10
- Tool: CB09+0
- Speed: 30 cm/s
MH, SC2, LP3, and Titan 1:
- Blade: 45°/60°
- Gram-Force: 100-110
- Speed: 180 cm/s
- Blade Advancing Varies
Titan 2 & 3:
- Blade: 45°/60°
- Gram-Force: 100-110
- Speed: 300mm/s
- Blade Advancing Varies
Mimaki CG-60SR III:
- Blade: 45°
- Gram-Force: 110
- Offset: 30
- Speed: 20-30mm/s
Application Settings
(Home Iron)
- Set iron dial between Cotton and Linen
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 10 seconds
- Peel carrier warm
(Heat Press)
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Preheat garment for 2-3 seconds
- Apply design at 311°F/155°C
- Use medium pressure for 15 seconds
- Peel carrier warm (at least 10 seconds off press)
Accessories and Laundering
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold/mild detergent
- Do not dry clean
- Dry on normal dryer setting
Recommended Accessories:
- Siser Weeder
- Multipurpose paper or Heat transfer cover sheet
