The Total Ink Solutions® Opti-922 Biting & Retarder is a specialized additive formulated to enhance the performance of the 66000 series screen inks. Known for their superior adhesion and durability, these inks are ideal for use on a wide variety of substrates, including challenging surfaces such as polyurethane, polyamide (nylon), polyester, latex, leather, and more. The Opti-922 Biting & Retarder improves ink flow and printability, ensuring consistent, high-quality results on even the most difficult-to-print materials.
Key Features:
- Enhanced Ink Flow: Optimizes the flow and application of 66000 series inks, ensuring smooth, even coverage.
- Superior Adhesion: Boosts the adhesion properties of inks, making them ideal for challenging substrates like polyurethane and leather.
- Flexible and Durable Finish: Provides a smooth, flexible, and scuff-resistant gloss finish that enhances the durability and appearance of printed materials.
- Compliance: Formulated with non-leaded pigments and compliant with safety and environmental standards, including California Proposition 65 and RoHS.
Pre-Test Recommendation:
It is recommended to pre-test the ink with the Opti-922 Biting & Retarder on your actual substrate before any full production run to ensure proper adhesion, durability, and other desired effects.
Finish:
- Smooth, Flexible, and Gloss Finish: Delivers a high-quality finish that is both durable and visually appealing.
Color Range:
- Available Colors: The 66000 series ink is available in both opaque and transparent colors, all formulated with non-leaded pigments for safety and compliance.
Coverage:
- Coverage: Approximately 1,000 square feet (101 m²) per gallon through a mesh count of 250 (100T European) monofilament polyester.
Screen Fabric Recommendations:
- Mesh Counts: Suitable for mesh counts ranging from 230-280 (92T-112T/cm European) monofilament polyester.
- Stencil: Compatible with dual-sensitized direct method photo emulsion (such as Optima EM-500), SBQ pre-sensitized photo emulsion, or any solvent-resistant film or photo emulsion.
Drying Instructions:
- Air Dry: Dries by solvent evaporation in approximately 30 minutes.
- Jet-Dry: Jet drying takes 20 to 30 seconds at 135°F to 180°F (37°C to 83°C).
Modification Options:
- Extend Color/Reduce Pigmentation: Add 66928 Match Base.
- Fine Detail Printing: Add 66PC850 Halftone Base for precise, detailed prints.
- Improve Ink Flow: Add 1/2%-1% FA-011 Flow Agent by weight.
- Ink Reduction: For optimal results, reduce the 66000 series ink by 5-10% by weight with T-976. In hot, humid conditions, add 3-5% T-922 or T-974 sparingly to prevent ink drying.
Quick Guide for Ink Modification:
- T-922 Biting & Retarder: 3-5% by weight
- T-974 Retarder: 3-5% by weight
- T-976 Thinner: 5-10% by weight
- FA-011 Flow Agent: 1/2%-1% by weight
Clean-Up Instructions:
- Recommended Solvents: Use T-902 or T925 Wash-up, SC-500 Bio Wash-up, or SC-510 Instant Bio Wash-up for effective cleaning, ensuring that your equipment remains clean and free of residual ink, ready for the next print job.
Packaging Options:
The Opti-922 Biting & Retarder is available in various sizes to meet your production needs:
- 1-Quart (0.945 Liters)
- 1-Gallon (3.78 Liters)
Safety & Handling:
- Safety First: Always refer to the Material Safety Data Sheet (MSDS) for complete safety information.
- Protective Gear: Use safety gloves and eye protection when handling inks and solvents to prevent skin and eye contact.
- Ventilation: Ensure proper ventilation during use to avoid inhaling fumes.
Why Choose Total Ink Solutions® Opti-922 Biting & Retarder?
The Total Ink Solutions® Opti-922 Biting & Retarder is a must-have for screen printers working with challenging substrates like polyurethane, leather, and nylon. By enhancing ink flow, adhesion, and durability, this additive ensures superior print quality and longevity, even on the most complex surfaces. Trust Total Ink Solutions® to provide products that meet the highest standards of quality, safety, and environmental responsibility.
