Athletic - White Fast Flash Polyester Plastisol Ink - 100% Polyesters

Athletic Fast Flash White Polyester Plastisol Ink is a high-opacity white built for high-speed automatic printing — it flashes fast so your press keeps moving, cures cool at 290–310°F, and lays down a bright, low-bleed underbase on 100% polyester that blocks dye migration. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing.

Features & benefits

• Fast flash — flashes quickly for high-speed automatic printing
• High-opacity poly underbase — bright, dense white base for colors
• Bleed-resistant on polyester — blocks dye migration
• Low cure (290–310°F) — runs cool
• CPSIA-compliant & phthalate-free — made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

• 100% polyester — jerseys, performance tees, athletic wear
• Poly blends & sublimated garments — prone to dye migration — a bright bleed-blocking underbase

Printing & curing

• Mesh: 110–160 for a bright, high-opacity underbase
• Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
• Flash: 240–260°F between colors
• Cure: curing is a time-and-temperature process — bring the full ink film to 290–310°F (143–154°C); the low cure is what keeps polyester dyes from bleeding; confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

• Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
• Quick Flash Reducer — thins for easier printing.
• Soft Hand Base — softer hand feel.
• UMX® Custom Color Match — send us your target color reference and we custom-mix the color for you (plastisol, solvent, UV & water-base).
• Cleanup: OPTI Wash 125 and OPTI Spot 303.

Safety, PPE & storage

• Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
• Print with adequate ventilation; vent your dryer.
• Always stir before use.
• Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As an all-polyester low-cure ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
• Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com

---

Safety & Technical Documents

• Safety Data Sheet (SDS) — 2026
• Technical Data Sheet (TDS) — 2026
• California Proposition 65 Statement (Plastisol & Water-Based Inks)

⚠️ WARNING (California Proposition 65): This product can expose you to chemicals including titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. See our full Proposition 65 Statement.