Permanent Sticker Glow Vinyl is a glow-in-the-dark permanent adhesive vinyl built for stickers, decals, and signage that stays visible after the lights go out. It charges under any light source and releases a soft green glow in the dark.
What it is
-
Type: Permanent pressure-sensitive adhesive sign and sticker vinyl
-
Finish: Glow in the dark (charges in light, glows green in darkness)
-
Adhesive: Permanent, solvent-based — bonds hard and resists lifting
-
Backing: Layflat liner for clean feeding and easy weeding
What it's for
- Safety and wayfinding markers — exit paths, stair edges, equipment labels
- Glow stickers and decals
- Novelty signage, event and haunted-attraction graphics
- Any decal that needs to read in low or no light
Working with it
- Cuts on any standard craft or professional vinyl cutter.
- Because the glow layer adds body, run a slightly deeper blade setting and slower speed than you would for standard calendered vinyl. Always test-cut first.
- Weed and apply with standard application tape.
- Apply to a clean, dry, oil-free surface. Adhesive reaches full bond strength after roughly 24 hours.
Charging & glow
Expose the printed side to bright light — sunlight or artificial — to charge. Glow output is strongest immediately after charging and fades gradually. Charge time and glow duration depend on how bright and how long the light exposure was.
Care
For best life, use indoors or in protected outdoor applications. Clean gently with mild soap and water. Avoid abrasive cleaners and solvents, which can dull the glow layer.
