Franmar® 610SP Soy Gel Sprayable Coatings Remover

$33.80

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: FRANMAR-610SP-QT
Size: Quart

BLUE BEAR® Soy Gel™ Spray 610SP Sprayable Coatings Remover is built for projects with a lot of square footage. It combines the performance of Soy Gel with a formula designed to run through HVLP or industrial airless sprayers. Made with American-grown soybeans, it is low-odor, easy to use and delivers the same stripping power as the standard gel.

Why shops use it

Removes multiple layers of paint, lead-based paint*, varnish, enamel, urethane and other simple coatings in one application
Works on wood, metal, concrete and masonry
No methylene chloride
Average coverage of 125 sq ft per gallon

*Lead becomes encapsulated, preventing airborne particles and allowing for safe removal. Dispose of in accordance with local, state and federal regulations.

Directions

Test in a small, inconspicuous area before beginning the project.
Apply thickly with a 3- or 4-stage HVLP sprayer using a 2.5 mm tip/needle, or an industrial airless sprayer with a 519 (.019 in) or larger tip at 3,000 PSI or higher.
Applying too thinly will cause the product to dry out before removal is complete.
When the coating begins to buckle, check with a scraper to see whether it has softened down to the surface. If not, wait longer and recheck.
Once the coating is completely softened, remove it with a scraper.
Follow up with BLUE BEAR® Emerge™ 700DG Degreaser for easy clean-up of any remaining residue.

Available sizes

Quart, Gallon, 2.5 Gallon, 5 Gallon, 12 Quart Case, and 4 Gallon Case.

Safety & Handling

Use in a well-ventilated area.
Wear chemical-resistant gloves and eye protection.
Always test on a small, inconspicuous area before treating a full surface.
Keep containers sealed and store in a cool, dry place away from direct sunlight.
A Safety Data Sheet (SDS) is available from Franmar at franmar.com/documents-sds and must be reviewed before use.

WARNING: This product can expose you to chemicals including n-methyl-2-pyrrolidone, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.