Franmar® Ink Remover - On-Press – Fast - Color Changes

Complete simple, safer color changes with Color Change™ On-Press Ink Remover. Color Change makes quick work of color changes without pulling the screen off the press, and it will also open clogged mesh areas in the middle of a run. It is effective on plastisol and all-purpose inks, and the non-aerosol formula is easy to use and free from harsh chemicals.

• Fast on-press color changes — no need to break down the screen
• Opens clogged mesh and clears partial images during a run
• Effective on plastisol and all-purpose inks
• Non-aerosol formula, free from harsh chemicals

How to use: Spray or pour a small amount onto the screen and wipe the screen clean. Repeat on the back of the screen image. Allow the screen to dry thoroughly before printing the next color.

Typical uses: Color changes on press; clearing clogged mesh mid-run; quick spot clean-ups at the press.

Available sizes: Quart, Gallon and 5 Gallon.

Safety & Handling

• Handling: Use in a well-ventilated area. Wear chemical-resistant gloves and eye protection. Avoid prolonged or repeated skin contact and wash thoroughly after handling. Keep out of reach of children.
• Storage: Store in the original, tightly sealed container in a cool, dry place, out of direct sunlight and away from heat and sources of ignition. Do not allow to freeze.
• Safety Data Sheet: A Safety Data Sheet (SDS) and Technical Data Sheet are available from Franmar at franmar.com/documents-sds. Consult the SDS before use.