White Plastisol Ink – All Purpose for Cotton & Polyester Printing

$28.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: PFAP-019-PT
Size: Pint

White Plastisol Ink is our all-purpose white for cotton and polyester printing — a high-opacity, low-bleed white that prints direct or as a bright flash underbase across cotton, 50/50 blends and light-color polyester. It's stretchable, cures at 300–310°F, and lays down creamy and print-ready. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

Pint through 55 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing.

Features & benefits

Prints cotton & polyester — cotton, 50/50 blends, and light-color polyester
High opacity — bright, dense white coverage on darks
Dependable flash underbase — solid base for colors on dark garments
Low-bleed & stretchable — clean coverage that moves with the garment
Creamy & print-ready — smooth lay-down on manual or automatic presses
Pint to 55 gallon — stock sizes plus drums for production shops
CPSIA-compliant & phthalate-free — safe for kids' apparel, made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

100% cotton — full opacity, bright clean white
50/50 cotton/poly blends
Light-color polyester — low-bleed; for dark or high-bleed poly use a grey blocker underbase or an athletic/poly white
Runs as a flash underbase under bright colors on darks

Printing & curing

Mesh: 110–160 for maximum opacity; up to 200+ for a lighter deposit
Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
Flash: 240–260°F when used as an underbase
Cure: curing is a time-and-temperature process — bring the full ink film to 300–310°F (150–154°C); confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
Quick Flash Reducer — thins for easier printing.
Soft Hand Base — softer hand feel.
Pantone® Custom Color Match — send us your target Pantone® and we custom-mix the color for you (plastisol, solvent, UV & water-base).
Cleanup: OPTI Wash 125 and OPTI Spot 303.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
Print with adequate ventilation; vent your dryer.
Always stir before use.
Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years; low-cure and all-polyester inks store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com

Safety & Technical Documents

⚠️ WARNING (California Proposition 65): This product can expose you to chemicals including titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. See our full Proposition 65 Statement.