CAD-CUT® THERMO-FILM® WORLD’S
#1 ATHLETIC HEAT TRANSFER MATERIAL
Stahls’ CAD-CUT® Thermo-FILM® provides enhanced abrasion-resistance and durability,
ideal for use on full-contact sports jerseys and uniforms. Not only is it lab-tested to withstand
wash after wash, but it’s been proven on the field to outlast the life of the jersey itself
- Composition: Polyurethane (PU)
- Carrier: Clear, Pressure-Sensitive
- Thickness: 190 microns/.19mm
- Stretch & Rebound: 2
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatibl
CAD-CUT® Thermo-FILM® Heat Transfer Vinyl
Application Instructions
1-Color Application Instructions
Time:
6-8 seconds
Temperature:
330°F / 165°C
Pressure:
Medium
Peel:
Hot
2-Color Application Instructions
Time:
Tack background 2 seconds, peel hot, place foreground on top, 10 seconds
Temperature:
330°F / 165°C
Pressure:
Medium
Peel:
Hot
Heated Lower Platen - 100% Polyester
Time:
10 seconds
Upper:
270°F
Lower:
320°F
Pressure:
60 psi (#6/Medium on Hotronix)
Peel:
Hot
Heated Lower Platen - 95% Polyester / 5% Spandex / Triblends
Time:
30 seconds
Upper:
270°F
Lower:
290°F
Pressure:
60 psi (#6/Medium on Hotronix)
Hotronix® 360 IQ™ Hat Press
Time:
45 seconds
Upper:
280°F
Lower:
320°F
Pressure:
Medium
Peel:
Warm/Cold
Cover Sheet:
1/8" Foam Pad
Special Notes
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
Note
The recommended time, temperature, and pressure settings are for Stahls' Hotronix® heat press machines. Settings on other heat presses may vary.
