FIG. 01/63Total Ink Solutions

Total Ink Solutions

Athletic Plastisol Ink – 62 Colors – Low-Cure Bleed Resistant for 100% Polyester

$29.99

Pickup at our Hackensack, NJ location. Ready 30 minutes after ordering (in-stock items). Hours: Mon–Fri 8:00 AM–4:30 PM, Sat 8:00 AM–1:00 PM. You may not get a “ready” notification — just come in after 30 minutes. Pre-coated screens and Pantone matches require 24 hours.

SKU: PFATH-019-PT
Color: White
Size: Pint

Color

Athletic Plastisol Ink is a high-performance, low-cure plastisol engineered for 100% polyester and spandex — its dye-blocking chemistry and low cure stop polyester dyes from migrating or ghosting into your print, while a super-stretch film flexes with performance fabric without cracking. Bold, opaque color in 62 colors. CPSIA-compliant and phthalate-free, made in Hackensack, New Jersey.

62 colors. Pint, quart, gallon and 5 gallon. Heat cure. Made in the USA.

Also available in larger quantities — 30-gallon and 55-gallon drums; call 201-487-9600 for volume and discount pricing.

Features & benefits

Bleed-resistant dye-migration blocker — stops polyester dyes from ghosting into your print
Super-stretch — flexes with spandex and performance fabric without cracking
Low cure (290–310°F) — runs cool to protect heat-sensitive poly and save energy
High opacity — bold, solid color coverage on athletic wear
Creamy & print-ready — smooth flow on manual or automatic presses
62 colors, pint to 5 gallon (plus 30 & 55 gallon drums)
CPSIA-compliant & phthalate-free — safe for kids' apparel, made in the USA

Always run a test print first. Before any production run, print and fully cure a test on your exact garment and check opacity, hand, dye migration and wash-fastness. It's the best habit in the shop — if you're not sure on settings, call us at 201-487-9600 before you run the job.

What it prints on

100% polyester — jerseys, performance tees, athletic wear
Spandex & performance blends — the super-stretch film moves with the fabric
Poly blends & sublimated garments prone to dye migration — the bleed blocker holds color back

Printing & curing

Mesh: 110–160 for opacity; up to 200+ for lighter prints
Squeegee: 65, 75 or 80 durometer — or a 70/90/70 triple durometer
Flash: 240–260°F; keep flash low and brief to avoid triggering dye migration
Cure: curing is a time-and-temperature process — bring the full ink film to 290–310°F (143–154°C); the low cure is what keeps polyester dyes from bleeding; confirm with a temp gun or donut probe, not dryer air temp

Recommended companion products

Nylon Bond 289 Additive — mix into this ink to bond prints to nylon and other slick synthetics (catalyst; stir in a small amount, limited pot life, always test first).
Quick Flash Reducer — thins for easier printing.
Soft Hand Base — softer hand feel.
Pantone® Custom Color Match — send us your target Pantone® and we custom-mix the color for you (plastisol, solvent, UV & water-base).
Cleanup: OPTI Wash 125 and OPTI Spot 303.

How close are we to your Pantone?

See our Standard Color → Pantone® (PMS) Match Chart — the closest Pantone® reference for every Total Ink Solutions standard color, with RGB and HEX values. For an exact, verified match, our UMX® system mixes to your target.

Safety, PPE & storage

Wear nitrile gloves and safety glasses; avoid prolonged skin contact with uncured ink.
Print with adequate ventilation; vent your dryer.
Always stir before use.
Storage & shelf life: keep sealed, out of sun. Shelf life 1–2 years. As an all-polyester low-cure ink, store at 60–80°F. In high heat expect container expansion — open carefully. Do not freeze.
Refer to the Safety Data Sheet before use.

Compliance

CPSIA compliant (16 CFR 1303 <90 ppm; CPSIA §101 <100 ppm total lead) — safe for children's apparel. Phthalate-free.

Questions?

Total Ink Solutions
200 South Newman Street, Unit 4 & 5
Hackensack, NJ 07601
Phone: 201-487-9600 · Fax: 201-487-9620
Email: sales@totalinksolutions.com

Safety & Technical Documents

⚠️ WARNING (California Proposition 65): This product can expose you to chemicals including titanium dioxide (airborne, unbound particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov. See our full Proposition 65 Statement.