Franmar® Greeneway Multipurpose Ink Remover

If your shop runs a wide range of inks and additives, Greeneway™ Multipurpose Ink Remover is the one cleaner that handles all of it. The versatile formula lets screen printers clean any type of textile ink from the same bottle, so there is no need to stock a separate remover for every ink system.

• Cleans all types of textile ink — plastisol, water-based and discharge
• Made with American-grown soybeans
• Fast-acting and low-odor
• Safer than many traditional solvent-based ink removers

How to use: Pour or spray a small amount onto the screen and scrub with a Biggee™ scrub pad or soft brush. Repeat on the back of the screen image, then rinse both sides with pressurized water. Greeneway may be diluted for plastisol ink cleaning only — test for effectiveness before adopting a dilution in production.

Typical uses: General screen washing in mixed-ink shops; on-press and off-press ink removal; pre-reclaim ink knockdown.

Available sizes: Quart, Gallon and 5 Gallon.

Safety & Handling

• Handling: Use in a well-ventilated area. Wear chemical-resistant gloves and eye protection. Avoid prolonged or repeated skin contact and wash thoroughly after handling. Keep out of reach of children.
• Storage: Store in the original, tightly sealed container in a cool, dry place, out of direct sunlight and away from heat and sources of ignition. Do not allow to freeze.
• Safety Data Sheet: A Safety Data Sheet (SDS) and Technical Data Sheet are available from Franmar at franmar.com/documents-sds. Consult the SDS before use.