HOLOGRAPHIC HEAT TRANSFER VINYL 18"

HOLOGRAPHIC HEAT TRANSFER VINYL 12"

A New Dimension in Heat Transfer Materials! Holographic by Siser is a new dimension in heat transfer vinyl. Holographic is available in many special effect colors and finishes that will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with creating rhinestone designs. The Holographic line also features our Spectrum material. Spectrum is unlike any other material, giving your designs a mirror, rainbow finish. Siser® Holographic is CPSIA Certified, so it's perfect for decorating items intended for children. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Light Cardstock Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 14 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 3 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17-18 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 85-90 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 75-80 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

HOLOGRAPHIC HEAT TRANSFER VINYL 20"

A New Dimension in Heat Transfer Materials! Holographic by Siser is a new dimension in heat transfer vinyl. Holographic is available in many special effect colors and finishes that will take your designs to a new level. Love the look of rhinestones but don’t want to go through all the hassle? Holographic can be cut to look exactly like rhinestones, without having to go through all the extra work associated with creating rhinestone designs. The Holographic line also features our Spectrum material. Spectrum is unlike any other material, giving your designs a mirror, rainbow finish. Siser® Holographic is CPSIA Certified, so it's perfect for decorating items intended for children. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Light Cardstock Silhouette Cameo: Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 14 Brother Scan N Cut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 3 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17-18 Tool: CB09U+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 85-90 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 75-80 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 10-15 seconds If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds Peel carrier cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

BRICK® 600 FLUORESCENT HEAT TRANSFER VINYL 19.7"

Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s semi-gloss finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser! Siser® Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Cutter Settings Cricut: Blade: Standard Setting: Cardstock Light+ Silhouette Cameo: Blade: Standard, 10 Material: Heat Transfer, Flocked Speed: 4 Force: 33 Brother Scan N Cut: Blade: Standard, 10 Cut Speed: 1 Cut Pressure: 2 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 150-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 11-12 Tool: CB09+0 Speed: 25 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 100-110 Speed: 180 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 120-130 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 140 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 10-15 seconds Peel carrier cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 311°F/155°C Use medium pressure for 20 seconds Peel carrier cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet

BRICK® HEAT TRANSFER VINYL 600 20"

Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s semi-gloss finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser! Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Cutter Settings Cricut: Blade: Standard Setting: Cardstock Light+ Silhouette Cameo: Blade: Standard, 10 Material: Heat Transfer, Flocked Speed: 4 Force: 33 Brother Scan N Cut: Blade: Standard, 10 Cut Speed: 1 Cut Pressure: 2 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 150-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 11-12 Tool: CB09+0 Speed: 25 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 100-110 Speed: 180 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 120-130 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 140 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 20 seconds If areas of design lift after application, replace cover sheet and re-press for 10-15 seconds Peel carrier cold (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 311°F/155°C Use medium pressure for 20 seconds Peel carrier cold Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet

GLITTER WHITE AND NEON 20"

Bring Your Designs to Life by Adding Some Sparkle! Our Glitter heat transfer vinyl is the best on the market. Our colors are vibrant and contain maximum sparkle! Why have a plain design when you can bling it out for maximum appeal? Glitter is CPSIA Certified so that even kids clothing can look amazing. You can also sublimate directly onto Siser Glitter! Watch the sublimated glitter video here! Siser® Glitter™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 120-130 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 100-110 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15-20 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier warm (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier (at least 15 seconds off press) Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ GLITTER 20"

Bring Your Designs to Life by Adding Some Sparkle! Our Glitter heat transfer vinyl is the best on the market. Our colors are vibrant and contain maximum sparkle! Why have a plain design when you can bling it out for maximum appeal? Glitter is CPSIA Certified so that even kids clothing can look amazing. You can also sublimate directly onto Siser Glitter! Watch the sublimated glitter video here! Siser® Glitter™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 120-130 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 100-110 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15-20 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier warm (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier (at least 15 seconds off press) Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

GLITTER WHITE AND NEON 12"

Bring Your Designs to Life by Adding Some Sparkle! Our Glitter heat transfer vinyl is the best on the market. Our colors are vibrant and contain maximum sparkle! Why have a plain design when you can bling it out for maximum appeal? Glitter is CPSIA Certified so that even kids clothing can look amazing. You can also sublimate directly onto Siser Glitter! Watch the sublimated glitter video here! Siser® Glitter™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 120-130 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 100-110 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15-20 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier warm (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier (at least 15 seconds off press) Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified

EASYWEED™ GLITTER 12"

Bring Your Designs to Life by Adding Some Sparkle! Our Glitter heat transfer vinyl is the best on the market. Our colors are vibrant and contain maximum sparkle! Why have a plain design when you can bling it out for maximum appeal? Glitter is CPSIA Certified so that even kids clothing can look amazing. You can also sublimate directly onto Siser Glitter! Watch the sublimated glitter video here! Siser® Glitter™ is CPSIA Certified, so it's perfect for decorating children's clothing and accessories. Compatible Materials 100% Cotton 100% Polyester Poly/Cotton Blends Leather Cutter Settings Cricut: Blade: Standard Setting: Iron-on Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 Brother Scan N Cut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 Other Cutter Settings Roland GS/GX-24: Blade: 45° Gram-Force: 180-190 Offset: .250 Speed: 30 cm/s Graphtec: Blade: 45° Gram-Force: 17 Tool: CB09+0 Speed: 30 cm/s MH, SC2, LP3, and Titan 1: Blade: 45°/60° Gram-Force: 120-130 Speed: 300 cm/s Blade Advancing Varies Titan 2 & 3: Blade: 45°/60° Gram-Force: 100-110 Speed: 300mm/s Blade Advancing Varies Mimaki CG-60SR III: Blade: 45° Gram-Force: 120 Offset: 30 Speed: 20-30mm/s Application Settings (Home Iron) Set iron dial between Cotton and Linen Cover with Heat Transfer Cover Sheet or Multipurpose Paper Place on flat, hard surface (ironing board not recommended) Press iron with medium/firm pressure (do not slide iron) Press each section of design for 15-20 seconds If areas of design lift after application, replace cover sheet and re-press for 10 seconds Peel carrier warm (Heat Press) Cover with Heat Transfer Cover Sheet or Multipurpose Paper Preheat garment for 2-3 seconds Apply design at 320°F/160°C Use medium pressure for 15-20 seconds Peel carrier (at least 15 seconds off press) Accessories and Laundering Laundering: Wait 24 hours before first wash Machine wash warm or cold/mild detergent Do not dry clean Dry on normal dryer setting Recommended Accessories: Siser Weeder Multipurpose paper or Heat transfer cover sheet Certification CPSIA Certified