Shimmer Plastisol Ink Series
Total Ink Solutions® Shimmer Series is a phtalate free plastisol ink that creates a simulated glitter / metallic look, but with the ability to still print through a 110 Mesh Screen. This series is the ultimate choice when looking to add some sparkle to your client’s project.
Features:
- Vibrant colors.
- Double Hit NO UNDERBASE required.
- Opaque.
- Smooth Surface
- Excellent adhesion.
Stock Use:
100% Cotton
50% Cotton / 50% Polyester
Details:
Print ease with ease by using the correct mesh screen. There is no need for an underbase with this product. Simply print 2 hits of ink and you are good to go for each color. If you are printing multiple inks, then flash the shimmer ink at 220°F (105°C) for 3 – 5 seconds prior to printing your next color. The shimmers reflective attribute may elongate the flash time depending on flash unit. Make sure to test prior to full production.
MESH:
We suggest an 86 – 110 mesh screen for the Shimmer Series of inks.
Curing Instructions:
Flash at 220°F (105°C) for 3 – 5 seconds and cure at 320°F (160°C).
Clean Up:
Storage Information:
Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date.
Compliance:
In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>
