Twinkle is a brand-new type of glimmering HTV by Siser®. While our Glitter HTV has a textured feel, the new Twinkle HTV contains embedded flakes that result in a smooth finish.
Additionally, Twinkle’s flakes have reflective properties that give o a unique shine when exposed to direct light similarly to our EasyReflective® line.
Twinkle will initially launch in 6 colors with more to follow later in 2020.
The application process for Twinkle is similar to EasyWeed®, but the carrier should be peeled WARM. Layering is also NOT recommended with Twinkle.
*Recommended cut settings are still being tested.
Compatible Materials
- 100% Cotton
- 100% Polyester
- Poly/Cotton Blends
Cutter Settings
Cricut:
- Blade: Standard
- Setting: Glitter Iron-on
Silhouette Cameo:
- Blade: Auto-Blade, 3
- Speed: 8
- Force: 10
Brother Scan N Cut:
- Blade: Auto-Blade
- Cut Speed: 1
- Cut Pressure: 4
- Half Cut on
Other Cutter Settings
Roland GS/GX-24:
- Blade: 45°
- Gram-Force: 130-160
- Offset: .250
- Speed: 30 cm/s
Graphtec:
- Blade: 45°
- Gram-Force: 13
- Offset: 250
- Speed: 35 cm/s
MH, SC2, LP3, and Titan 1:
- Blade: 45°/60°
- Gram-Force: 120-130
- Speed: 300mm/s
- Blade Advancing Varies
Titan 2 & 3:
- Blade: 45°/60°
- Gram-Force: 100-110
- Speed: 300mm/s
- Blade Advancing Varies
Mimaki CG-60SR III:
- Blade: 45° / 60°
- Gram-Force: 95
- Offset: 30
- Speed: 20-30mm/s
Application Settings
(Home Iron)
- Set iron dial between Cotton and Linen
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Place on flat, hard surface (ironing board not recommended)
- Press iron with medium/firm pressure (do not slide iron)
- Press each section of design for 15 seconds
- If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
- Peel carrier warm
(Heat Press)
- Cover with Heat Transfer Cover Sheet or Multipurpose Paper
- Preheat garment for 2-3 seconds
- Apply design at 305°F/150°C
- Use medium/firm pressure for 15 seconds
- Peel carrier warm (at least 15 seconds off press)
Accessories and Laundering
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold/mild detergent
- Do not dry clean
- Dry on normal dryer setting
Recommended Accessories:
- Siser Weeder
- Multipurpose paper or Heat transfer cover sheet
