WATERBASE FLUORESCENT - ORANGE

WATERBASE FLUORESCENT - MINT GREEN

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

WATERBASE FLUORESCENT - PURPLE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

WATERBASE FLUORESCENT - SHOCKING PINK

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

WATERBASE FLUORESCENT - CHARTREUSE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

MEGA INKJET WATERPROOF FILM ROLL - 17" WIDTH X 100'

MEGA Films Waterproof Inkjet Film Roll A fast drying “waterproof type” film that satisfies the needs of the most demanding screen printer, at a great price.Its UV densities easily match those of silver films.Works great with either pigment or dye-based ink As always, product satisfaction is guaranteed Always use high resolution images for best results.1440dpi for line images, lower is ok for halftone workMake sure you have the film loaded correctly.Be sure that the coated side will be face-up under the print head SettingsAlways use the highest resolution you can.This will often be determined by how fast you want the film to image.The higher the resolution the slower the image speed.Ink Density Adjust the amount of ink to ensure maximum density while still dryingDrying time In most cases the ink will be touch dry as the film comes out of the printerDry EmulsionEnsure that your emulsion has fully dried before attempting to exposeThe image on the film will be damaged if the emulsion is still wet or tackyFilm StorageTo re-use the film it is best stored with clean paper between each sheet of filmStore in a dry environment 100' Waterproof Inkjet Film Roll Available in 17″, 24″, 36" and 44" Widths

WATERBASE FLUORESCENT - CERISE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>

FRANMAR® BLACK EMULSION REMOVER SCRUB BRUSH AND HANDLE

This Emulsion Remover Scrub Brush and Handle has fine plastic bristles that hold the replaceable scrub pads tight to the handle completing the scrub brush. It’s a great money saver in any shop because this handle will outlast several replaceable pads so each time a pad goes bad you only have to replace the pad, not the brush. We recommend getting several extra pads per handles; this way when your pad goes bad you will have one on hand when it needs to be replaced. Includes 1 Black Emulsion Remover Scrub Brush and Handle

WATERBASE FLUORESCENT - BRILLIANT BLUE

WBTX Waterbase Ink Series Total Ink Solutions® WBTX Series is an eco-friendly waterbase ink that has extremely vibrant colors, along with being the creamiest ink in the industry. This ink series is designed to get your shop printing with waterbase in the easiest possible way. Features: Vibrant colors. Creamy Inks. Soft hand prints. Wet-on-wet printing. Short flash times. LOW CURE WITH DRIVE ADDITIVE Stock Use: 100% Cotton Details: For single print colors, colors will reproduce best over white - light substrate or single white base plate on dark substrates. When direct printing over dark cotton, print-flash-print. For a lower curing temperature please use the DRIVE additive this product is added about 1.5% by weight to the ink, and will lower the curing temperature to as low as 180 degrees. Curing Instructions: Flash at 250°F (121°C) for 3 - 5 seconds and cure at 320°F (160°C) – 350°F (177°C). Curing is not complete until all water moisture is removed from the ink, and ink reaches full temp. Air circulation in your dryer helps a lot with this process. Clean Up: OPTIWASH 125 – Ink Remover Storage Information: Store at 65-90°F (18-32°C), avoiding direct sunlight. Best Use within one year of manufacturing date. Compliance: In Compliance with CPSIA (Consumer Product Safety Improvement Act) 2008 Section 101 Lead Content in substrates (<300 ppm lead) as Section 108 Phthalates (<.1 dbp dehp>