Load heat transfer vinyl shiny side down on your cutting mat, and press it shiny side up on the shirt. The shiny side is the clear plastic carrier sheet. That...
Total Ink Solutions |
3D puff heat transfer vinyl is a specialty HTV that expands and rises off the fabric when heat-pressed, creating a raised, foam-like 3D effect similar to puff plastisol ink. It...
Total Ink Solutions |
Siser EasyWeed is a polyurethane heat transfer vinyl that presses at 305°F for 10–15 seconds with medium pressure and peels warm. It's the workhorse HTV most shops reach for on...
Total Ink Solutions |
Printable heat transfer vinyl is a coated HTV sheet or roll designed to accept printer ink (inkjet or eco-solvent) on the surface, then transfer onto a garment with a heat...
Total Ink Solutions |
Heat transfer vinyl designs ready to press are pre-cut, pre-weeded HTV graphics that you can apply to a garment with a heat press in 10–15 seconds. No cutter time, no...
Total Ink Solutions |
Plastisol ink is a PVC-based screen printing ink that cures at 320°F and sits on top of the fabric rather than soaking into it. It's the standard for commercial garment...
Total Ink Solutions |
A heat transfer vinyl printer is a printer paired with printable HTV media that lets you produce full-color, heat-applied graphics for apparel without screens or DTG equipment. The two common...
Total Ink Solutions |
Rapid cure plastisol ink is a plastisol formulated to fully cure at a lower temperature — typically 260°F to 280°F — instead of the standard 320°F most general-purpose plastisols need....
Total Ink Solutions |
The best plastisol ink is the one that matches your fabric, cures cleanly at your dryer's temperature, and lays down opaque in one or two hits. For most cotton work...
Total Ink Solutions |
International Coatings is a US-based plastisol ink manufacturer based in Cerritos, California, known for their 7100 series whites, athletic plastisols, and stretch-friendly formulas. Their inks cure at 320°F (160°C) and...
Total Ink Solutions |
Heat transfer vinyl (HTV) is a polyurethane or PVC film with a heat-activated adhesive backing that bonds to fabric under pressure at 280–320°F. You cut the design with a vinyl...
Total Ink Solutions |
White plastisol ink is a PVC-based screen printing ink that sits on top of the fabric, cures at 320°F, and produces the opaque white base every dark-garment print depends on....
Total Ink Solutions |
Plastisol ink remover is a solvent-based or biodegradable cleaning chemical that dissolves uncured plastisol ink from screens, squeegees, spatulas, pallets, and occasionally garments. It breaks down the PVC resin and...
Total Ink Solutions |