The Total Ink Solutions® Solvent Ink Multi-Vac 10000 is a high-performance solvent-based ink formulated for printing on vacuum-formed plastics, including ABS, Acrylic, COP (Cyclic Olefin Polymer), Polystyrene, and Polycarbonate. Designed with mild odor and non-leaded pigments, this ink provides exceptional durability, superior printability, and scuff-resistant gloss finishes. Whether used for industrial applications or high-resolution graphics, Multi-Vac 10000 ensures long-lasting, vibrant prints with outstanding opacity and adhesion.

Key Features:

• Versatile Substrate Compatibility – Bonds seamlessly to ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, and COP (Cyclic Olefin Polymer).
• High-Quality Printability – Produces sharp details, vibrant colors, and high opacity for both opaque and transparent applications.
• Scuff-Resistant Gloss Finish – Enhances durability with a glossy, wear-resistant surface ideal for vacuum-formed plastics.
• Mild Odor & Non-Leaded Pigments – Safer for work environments, reducing harsh chemical exposure.

Ideal Stock Use:

• ABS
• Acrylic
• Butylate
• Polystyrene
• Polycarbonate
• COP (Cyclic Olefin Polymer)
• Vacuum-Formed Plastics

Product Details & Performance:

• Excellent print quality with high opacity – ideal for opaque and transparent color applications.
• Coverage: Approximately 1,000 sq. ft. per gallon when used with a 250-mesh (100T European) monofilament polyester screen.

Drying Instructions:

• Air Dry: Solvent evaporation takes approximately 30 minutes.
• Jet-Dry: 20-30 seconds at 135°F to 180°F (37°C to 83°C).

Screen Printing Recommendations:

• Mesh Count: 230-280 (92T-112T European) monofilament polyester for optimal results.
• Stencil Type: Use dual-sensitized direct method photo emulsion (Optima EM-500) or SBQ pre-sensitized photo emulsion.
• Solvent-Resistant Film/Photo Emulsion Recommended.

Modification Options:

• Color Extension: Add 10790 Clear Base to extend color and reduce pigmentation.
• Detail Printing: Add 10800 Halftone Base for fine-detail prints.
• Flow Improvement: Add 0.5%-1% FA 011 Flow Agent by weight for smoother ink flow.
• Ink Reduction: Reduce 5-15% by weight with T-971 for optimal printing performance.
• Ink Drying Prevention: Under hot/humid conditions, use T-922, T-980, or T-999 to prevent premature drying.

Spraying Application:

• Spraying Thinner: Use T-690 Spraying Thinner for smooth, consistent spray applications.

Clean-Up Instructions:

• Recommended Cleaners:
  • T-902 or T-925 Wash-up
  • SC-500 Bio Wash-up
  • SC-510 Instant Bio Wash-up
  • Non-petrochemical cleaners for safe and thorough cleaning.

Packaging Options:

Available in multiple sizes to meet your production needs:

• 1-Quart (0.945 Liters)
• 1-Gallon (3.78 Liters)

Safety & Handling:

• Always refer to the MSDS (Material Safety Data Sheet) for proper handling and storage.
• Wear protective gloves and safety glasses when working with ink.
• Ensure proper ventilation to minimize exposure to solvent fumes.

Why Choose Total Ink Solutions® Solvent Ink Multi-Vac 10000?

Total Ink Solutions® Multi-Vac 10000 offers unmatched durability, superior print resolution, and a scuff-resistant gloss finish, making it the top choice for industries that require premium-quality printing on vacuum-formed plastics. Trusted for its safety, quality, and environmental responsibility, Multi-Vac 10000 is the ideal solution for professional-grade plastic printing.

Short SEO Description:

Total Ink Solutions® Solvent Ink Multi-Vac 10000 delivers high-quality, durable prints on vacuum-formed plastics like ABS, Acrylic, and Polycarbonate. With superior adhesion, scuff-resistant gloss finish, and excellent print opacity, this solvent ink is ideal for industrial and high-resolution applications. Available in 1-quart and 1-gallon sizes.

Solvent Ink-Multi-Vac-10000 Air Dry - Gallon Abs, Acrylic, Butylate, Polystyrene, Polycarbonate, Cop (Cyclic Olefin Polymer). Vacuum Formed Plastics

Product Use, Safety, and Liability Disclaimer

All products sold by Total Ink Solutions® are intended for professional, commercial, and industrial use only unless otherwise expressly stated in writing.

Customers are solely responsible for determining the suitability, safety, compatibility, and regulatory compliance of any product for their intended application. Because application methods, substrates, environmental conditions, equipment, and production processes vary widely, Total Ink Solutions® cannot guarantee product performance in every use case.

Required Customer Testing

Customers must conduct their own testing and evaluation prior to production use. Small-scale testing under actual production conditions is strongly recommended before full-scale manufacturing, resale, distribution, or end-use application.

Product Information

While Total Ink Solutions® strives to provide accurate product information, specifications, technical data, application instructions, and safety recommendations, such information is provided as a general guide only and should not be considered a guarantee of performance or suitability for any particular purpose.

If product information, certifications, safety data, compatibility details, or application instructions cannot be located on our website, the customer must contact Total Ink Solutions® before using the product.

No Food, Medical, or Safety-Critical Applications

Unless specifically stated in writing by Total Ink Solutions®, products are not intended, tested, certified, or approved for:

Direct food contact
Medical applications
Pharmaceutical applications
Human implantation or ingestion
Life-safety applications
Children's products
Regulatory-sensitive applications

The customer assumes all responsibility for verifying compliance with any applicable laws, regulations, certifications, and industry standards.

Limitation of Liability

To the fullest extent permitted by law, Total Ink Solutions®, its owners, employees, affiliates, suppliers, and representatives shall not be liable for any direct, indirect, incidental, special, consequential, punitive, or exemplary damages arising from or related to the purchase, handling, storage, application, misuse, or use of any product.

This includes, but is not limited to:

Production downtime
Lost profits
Lost business opportunities
Product failure
Equipment damage
Property damage
Personal injury
Regulatory violations
Customer claims
Third-party claims
Warranty Disclaimer

Except as expressly provided in writing, all products are provided "AS IS" and "AS AVAILABLE" without warranties of any kind, whether express or implied, including but not limited to implied warranties of merchantability, fitness for a particular purpose, non-infringement, or performance.

Assumption of Risk

By purchasing, handling, or using products supplied by Total Ink Solutions®, the customer acknowledges that industrial printing products may involve inherent risks and agrees to assume all responsibility for proper testing, handling, storage, application, safety procedures, regulatory compliance, and end-use suitability.

Customer Agreement

By purchasing products from Total Ink Solutions®, the customer agrees that they have reviewed available product information, understand the intended use of the products, and accept full responsibility for determining whether a product is appropriate for their intended application.

Questions regarding product suitability, safety, or application should be directed to Total Ink Solutions® before use.