OPTI-971 SLOW THINNER

OPTI-970B FAST THINNER

Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics. Excellent Printability and Resolution, Durability and Mar Resistant for exposure Excellent for vacuum forming. Mild-odor, formulated using only non-leaded pigments STOCK, END-USE: ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics DESCRIPTION: 10000 Series screen Ink is formulated for a wide variety of plastic printing applications. 10000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971. To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly). For Spraying Application, Use T-690 Spraying Thinner For removing misprint without surface damage, Use T-625 QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-922 Biting Solvent: 2-3% T-970B Fast Thinner: 5-15% T-971 Slow Thinner: 5-15% T-980/T-999 Retarder: 2-3% FA 011 Flow Agent: 1/2% to 1% All mixing proportions are measured by weight. CLEAN UP:, T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up. (Non-petrochemical) PACKAGING: 1-quart (0.945 Liter), 1- gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-999 SUPER RETARDER

Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics. Excellent Printability and Resolution, Durability and Mar Resistant for exposure Excellent for vacuum forming. Mild-odor, formulated using only non-leaded pigments STOCK, END-USE: ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics DESCRIPTION: 10000 Series screen Ink is formulated for a wide variety of plastic printing applications. 10000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971. To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly). For Spraying Application, Use T-690 Spraying Thinner For removing misprint without surface damage, Use T-625 QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-922 Biting Solvent: 2-3% T-970B Fast Thinner: 5-15% T-971 Slow Thinner: 5-15% T-980/T-999 Retarder: 2-3% FA 011 Flow Agent: 1/2% to 1% All mixing proportions are measured by weight. CLEAN UP:, T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up. (Non-petrochemical) PACKAGING: 1-quart (0.945 Liter), 1- gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

SOLVENT INK-MULTI-VAC-10000 SERIES ABS, ACRYLIC, BUTYLATE, POLYSTYRENE, POLYCARBONATE, COP (CYCLIC OLEFIN POLYMER). VACUUM FORMED PLASTICS

Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics. Excellent Printability and Resolution, Durability and Mar Resistant for exposure Excellent for vacuum forming. Mild-odor, formulated using only non-leaded pigments STOCK, END-USE: ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics DESCRIPTION: 10000 Series screen Ink is formulated for a wide variety of plastic printing applications. 10000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971. To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly). For Spraying Application, Use T-690 Spraying Thinner For removing misprint without surface damage, Use T-625 QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-922 Biting Solvent: 2-3% T-970B Fast Thinner: 5-15% T-971 Slow Thinner: 5-15% T-980/T-999 Retarder: 2-3% FA 011 Flow Agent: 1/2% to 1% All mixing proportions are measured by weight. CLEAN UP:, T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up. (Non-petrochemical) PACKAGING: 1-quart (0.945 Liter), 1- gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

SOLVENT INK-MULTI-VAC-10000 SERIES AIR DRY ABS, ACRYLIC, BUTYLATE, POLYSTYRENE, POLYCARBONATE, COP (CYCLIC OLEFIN POLYMER). VACUUM FORMED PLASTICS

Industry standard for ABS, Acrylic ,COP, Polystyrene .Polycarbonate, and other plastics. Excellent Printability and Resolution, Durability and Mar Resistant for exposure Excellent for vacuum forming. Mild-odor, formulated using only non-leaded pigments STOCK, END-USE: ABS, Acrylic, Butylate, Polystyrene, Polycarbonate, COP (Cyclic Olefin Polymer). Vacuum formed plastics DESCRIPTION: 10000 Series screen Ink is formulated for a wide variety of plastic printing applications. 10000 Series has excellent print quality with high opacity. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (Optima EM- 500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jet- dry in 20 to 30 seconds at 135° to 180° F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 10790 Clear Base. For printing fine details, add 10800 Halftone Base. To improve ink flow, add 1/2%-1% (by weight) FA 011 Flow Agent For best printing results, 10000 Series should be reduced 5-15% (by weight) with T-971. To prevent ink drying under hot & humid conditions, add T-922 or T-980 or T-999 (use sparingly). For Spraying Application, Use T-690 Spraying Thinner For removing misprint without surface damage, Use T-625 QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-922 Biting Solvent: 2-3% T-970B Fast Thinner: 5-15% T-971 Slow Thinner: 5-15% T-980/T-999 Retarder: 2-3% FA 011 Flow Agent: 1/2% to 1% All mixing proportions are measured by weight. CLEAN UP:, T-902 or T925 Wash-up SC-500 Bio.Wash-up SC-510 Instant Bio.Wash-up. (Non-petrochemical) PACKAGING: 1-quart (0.945 Liter), 1- gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-910 SLOW THINNER

Superior adhesion to CoroPlast ® and versatile plastic substrates Excellent Printability and Resolution, Durable Mar Resistant for exposure Mild-Odor,Formulated using only non-leaded pigments In compliance with California Prop. 65 and RoHs STOCK, END-USE: ABS. Acrylic, Polycarbonate (Lexan®). Polystyrene, Corona treated polyethylene and Polypropylene DESCRIPTION: 80000 Series screen ink is formulated for ultimate economy and convenience in multiple printing such as P-O-P displays, Signage, Industrial applications and more. It provides superior adhesion to a wide range of substrates, from Paper to hard-to-print plastics. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jetdry in 20 to 30 seconds at 135° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 80928 Match Base. For printing fine details, add 80PC850 Halftone Base. To improve ink flow, add 1/2%-1 % (by weight) FA 011 Flow Agent. For best printing results, 80000 Series should be reduced 5-15% (by weight) with T-910. To prevent ink drying under hot, humid conditions, add 2-3% (by weight) T-974 (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-910 5-15% T-974 2- 3% FA 011 1/2 to 1% (All mixing proportions by weight.) CLEAN UP: T-900, T-902 or T925 Wash-up SC-500 Bio Wash-up SC-510 Instant Bio. Wash-up. (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

OPTI-900 FAST THINNER / WASH UP

Superior adhesion to CoroPlast ® and versatile plastic substrates Excellent Printability and Resolution, Durable Mar Resistant for exposure Mild-Odor, Formulated using only non-leaded pigments In compliance with California Prop. 65 and RoHs STOCK, END-USE: ABS. Acrylic, Polycarbonate (Lexan®). Polystyrene, Corona treated polyethylene and Polypropylene DESCRIPTION: 80000 Series screen ink is formulated for ultimate economy and convenience in multiple printing such as P-O-P displays, Signage, Industrial applications and more. It provides superior adhesion to a wide range of substrates, from Paper to hard-to-print plastics. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jetdry in 20 to 30 seconds at 135° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 80928 Match Base. For printing fine details, add 80PC850 Halftone Base. To improve ink flow, add 1/2%-1 % (by weight) FA 011 Flow Agent. For best printing results, 80000 Series should be reduced 5-15% (by weight) with T-910. To prevent ink drying under hot, humid conditions, add 2-3% (by weight) T-974 (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-910 5-15% T-974 2- 3% FA 011 1/2 to 1% (All mixing proportions by weight.) CLEAN UP: T-900, T-902 or T925 Wash-up SC-500 Bio Wash-up SC-510 Instant Bio. Wash-up. (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

80000 SERIES AIR DRY COROPLAST SCREEN PRINTING INK - GALLON

Superior adhesion to CoroPlast ® and versatile plastic substrates Excellent Printability and Resolution, Durable Mar Resistant for exposure Mild-Odor,Formulated using only non-leaded pigments In compliance with California Prop. 65 and RoHs STOCK, END-USE: ABS. Acrylic, Polycarbonate (Lexan®). Polystyrene, Corona treated polyethylene and Polypropylene DESCRIPTION: 80000 Series screen ink is formulated for ultimate economy and convenience in multiple printing such as P-O-P displays, Signage, Industrial applications and more. It provides superior adhesion to a wide range of substrates, from Paper to hard-to-print plastics. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jetdry in 20 to 30 seconds at 135° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 80928 Match Base. For printing fine details, add 80PC850 Halftone Base. To improve ink flow, add 1/2%-1 % (by weight) FA 011 Flow Agent. For best printing results, 80000 Series should be reduced 5-15% (by weight) with T-910. To prevent ink drying under hot, humid conditions, add 2-3% (by weight) T-974 (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-910 5-15% T-974 2- 3% FA 011 1/2 to 1% (All mixing proportions by weight.) CLEAN UP: T-900, T-902 or T925 Wash-up SC-500 Bio Wash-up SC-510 Instant Bio. Wash-up. (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.

80000 SERIES COROPLAST SCREEN PRINTING INK - QUART

Superior adhesion to CoroPlast ® and versatile plastic substrates Excellent Printability and Resolution, Durable Mar Resistant for exposure Mild-Odor,Formulated using only non-leaded pigments In compliance with California Prop. 65 and RoHs STOCK, END-USE: ABS. Acrylic, Polycarbonate (Lexan®). Polystyrene, Corona treated polyethylene and Polypropylene DESCRIPTION: 80000 Series screen ink is formulated for ultimate economy and convenience in multiple printing such as P-O-P displays, Signage, Industrial applications and more. It provides superior adhesion to a wide range of substrates, from Paper to hard-to-print plastics. Note: Pre-test on actual substrate before any full production run. FINISH: Scuff resistant, gloss finish. COLORS: Available in opaque and transparent colors. COVERAGE: Approximately 1,000 square feet (101 m2) per gallon through mesh count 250 (100T European) monofilament polyester. SCREEN FABRIC: Mesh counts 230- 280 (92T-112T European) monofilament polyester. STENCIL: Dual-sensitized direct method photo emulsion (OPTIMA EM-500) or SBQ pre-sensitized photo emulsion or equivalent. Also, any solvent-resistant film or photo emulsion. DRYING: By solvent evaporation. Air dry in approximately 30 minutes; Jetdry in 20 to 30 seconds at 135° to 180°F (37°C to 83°C). MODIFICATION: To extend color and/or reduce pigmentation, add 80928 Match Base. For printing fine details, add 80PC850 Halftone Base. To improve ink flow, add 1/2%-1 % (by weight) FA 011 Flow Agent. For best printing results, 80000 Series should be reduced 5-15% (by weight) with T-910. To prevent ink drying under hot, humid conditions, add 2-3% (by weight) T-974 (use sparingly). QUICK GUIDE FOR INK MODIFICATION Modifier Proportion T-910 5-15% T-974 2- 3% FA 011 1/2 to 1% (All mixing proportions by weight.) CLEAN UP: T-900, T-902 or T925 Wash-up SC-500 Bio Wash-up SC-510 Instant Bio. Wash-up. (Non-Petrochemical) PACKAGING: 1-quart (0.945 Liter), 1-gallon (3.78 Liter), containers. SAFETY & HANDLING: Refer to Material Safety Data Sheet (MSDS) for complete information.