The Opti-925 Mild Lacquer Washup is tailored to work seamlessly with the 10000 series screen inks, which are known for their superior adhesion and durability on a wide range of plastic substrates. This washup solution helps ensure that your screens and tools remain clean and free of ink residue, which is essential for maintaining high print quality and extending the lifespan of your equipment.
Pre-Test Recommendation:
It is recommended to pre-test the washup solution on your actual substrate before any full production run to ensure compatibility and effectiveness.
Finish:
- Scuff Resistant Gloss Finish: The 10000 series ink, which this washup is designed to clean, provides a smooth, glossy finish that enhances the durability and appearance of printed materials.
Color Range:
- Available Colors: The 10000 series ink is available in both opaque and transparent colors, formulated with non-leaded pigments for safety and compliance.
Coverage:
- Coverage: Approximately 1,000 square feet (101 m²) per gallon through a mesh count of 250 (100T European) monofilament polyester.
Screen Fabric Recommendations:
- Mesh Counts: Suitable for mesh counts ranging from 230-280 (92T-112T/cm European) monofilament polyester.
- Stencil: Recommended stencils include dual-sensitized direct method photo emulsion (such as Optima EM-500) or SBQ pre-sensitized photo emulsion, or any solvent-resistant film or photo emulsion.
Drying Instructions:
- Air Dry: Dries by solvent evaporation in approximately 30 minutes.
- Jet-Dry: Jet drying takes 20 to 30 seconds at 135°F to 180°F (37°C to 83°C).
Modification Options:
- Extend Color/Reduce Pigmentation: Add 10790 Clear Base.
- Fine Detail Printing: Add 10800 Halftone Base for detailed prints.
- Improve Ink Flow: Add 1/2%-1% FA 011 Flow Agent by weight.
- Ink Reduction: For best results, reduce the 10000 series ink by 5-15% by weight with T-971. Under hot, humid conditions, add T-922, T-980, or T-999 sparingly to prevent ink drying.
Quick Guide for Ink Modification:
- T-922 Biting Solvent: 2-3% by weight
- T-970B Fast Thinner: 5-15% by weight
- T-971 Slow Thinner: 5-15% by weight
- T-980/T-999 Retarder: 2-3% by weight
- FA-011 Flow Agent: 1/2%-1% by weight
Clean-Up Instructions:
- Recommended Solvents: Use T-902 or T925 Wash-up, SC-500 Bio Wash-up, or SC-510 Instant Bio Wash-up for effective cleaning. These options ensure that your equipment remains clean and free of residual ink, ready for the next print job.
Packaging Options:
The Opti-925 Mild Lacquer Washup is available in various sizes to meet your production needs:
- 1-Quart (0.945 Liters)
- 1-Gallon (3.78 Liters)
Safety & Handling:
- Safety First: Always refer to the Material Safety Data Sheet (MSDS) for complete safety information.
- Protective Gear: Use safety gloves and eye protection when handling inks and solvents to prevent skin and eye contact.
- Ventilation: Ensure proper ventilation during use to avoid inhaling fumes.
Why Choose Total Ink Solutions® Opti-925 Mild Lacquer Washup?
The Total Ink Solutions® Opti-925 Mild Lacquer Washup is an essential cleaner for screen printers working with challenging plastic substrates. By providing effective cleaning without harsh odors, this washup solution helps maintain the quality of your prints and the longevity of your equipment. Trust Total Ink Solutions® to deliver products that meet the highest standards of quality, safety, and environmental responsibility.
lete information.
